[PATCH v5 09/10] ARM: dts: Simplify USB3503 on exynos5250-arndale
From: afaerber@suse.de (Andreas Färber)
Date: 2014-08-01 04:57:46
Also in:
linux-devicetree, linux-samsung-soc, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
There's no need for a simple-bus, place the smsc,usb3503a directly into the root node. That's what we're going to do on exynos5250-spring. Reported-by: Tomasz Figa <redacted> Signed-off-by: Andreas F?rber <afaerber@suse.de> --- v5: New Aligns with Spring's new USB3503 node. arch/arm/boot/dts/exynos5250-arndale.dts | 16 +++++----------- 1 file changed, 5 insertions(+), 11 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index a04a875346aa..9912d27492db 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts@@ -108,18 +108,12 @@ }; }; - usb_hub_bus { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; + // SMSC USB3503 connected in hardware only mode as a PHY + usb_hub: usb-hub { + compatible = "smsc,usb3503a"; - // SMSC USB3503 connected in hardware only mode as a PHY - usb_hub: usb_hub { - compatible = "smsc,usb3503a"; - - reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; - connect-gpios = <&gpd1 7 GPIO_ACTIVE_LOW>; - }; + reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; + connect-gpios = <&gpd1 7 GPIO_ACTIVE_LOW>; }; };
--
1.9.3