[PATCH v9 3/6] ARM: dts: Exynos: add CPU OPP and regulator supply property
From: dianders@chromium.org (Doug Anderson)
Date: 2014-07-31 00:37:43
Also in:
linux-pm, linux-samsung-soc
Thomas, On Wed, Jul 30, 2014 at 1:07 AM, Thomas Abraham [off-list ref] wrote:
quoted hunk ↗ jump to hunk
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index d0de1f5..3b12a97 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts@@ -575,3 +575,7 @@ usb-phy = <&usb2_phy>; }; }; + +&cpu0 { + cpu0-supply = <&buck2_reg>; +};diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index b4b35ad..f07e834 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts@@ -414,3 +414,7 @@ }; }; }; + +&cpu0 { + cpu0-supply = <&buck2_reg>; +};diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index f2b8c41..91acca7 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts@@ -509,4 +509,8 @@ }; }; +&cpu0 { + cpu0-supply = <&buck2_reg>; +}; + #include "cros-ec-keyboard.dtsi"diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 492e1ef..97b282c 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi@@ -58,11 +58,34 @@ #address-cells = <1>; #size-cells = <0>; - cpu at 0 { + cpu0: cpu at 0 { device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0>; clock-frequency = <1700000000>; + + clocks = <&clock CLK_ARM_CLK>; + clock-names = "cpu"; + clock-latency = <140000>;
Where did the 140000 number come from? My old calculations show that with lock time of 270 ad P up to 6 we were at 67.5us lock time.
quoted hunk ↗ jump to hunk
+ operating-points = < + 1700000 1300000 + 1600000 1250000 + 1500000 1225000 + 1400000 1200000 + 1300000 1150000 + 1200000 1125000 + 1100000 1100000 + 1000000 1075000 + 900000 1050000 + 800000 1025000 + 700000 1012500 + 600000 1000000 + 500000 975000 + 400000 950000 + 300000 937500 + 200000 925000 + >; }; cpu at 1 { device_type = "cpu";diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index cb2b70e..3154b4c 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi@@ -59,8 +59,26 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x0>; + clocks = <&clock CLK_ARM_CLK>; + clock-names = "cpu-cluster.0"; clock-frequency = <1800000000>; cci-control-port = <&cci_control1>; + clock-latency = <140000>; + + operating-points = < + 1800000 1250000 + 1700000 1212500 + 1600000 1175000 + 1500000 1137500 + 1400000 1112500 + 1300000 1062500 + 1200000 1037500 + 1100000 1012500 + 1000000 987500 + 900000 962500 + 800000 937500 + 700000 912500 + >; }; cpu1: cpu at 1 {@@ -69,6 +87,7 @@ reg = <0x1>; clock-frequency = <1800000000>; cci-control-port = <&cci_control1>; + clock-latency = <140000>; }; cpu2: cpu at 2 {@@ -77,6 +96,7 @@ reg = <0x2>; clock-frequency = <1800000000>; cci-control-port = <&cci_control1>; + clock-latency = <140000>; }; cpu3: cpu at 3 {@@ -85,14 +105,29 @@ reg = <0x3>; clock-frequency = <1800000000>; cci-control-port = <&cci_control1>; + clock-latency = <140000>; }; cpu4: cpu at 100 { device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x100>; + clocks = <&clock CLK_KFC_CLK>; + clock-names = "cpu-cluster.1"; clock-frequency = <1000000000>;
It does't start out at its maximum?
quoted hunk ↗ jump to hunk
cci-control-port = <&cci_control0>; + clock-latency = <140000>; + + operating-points = < + 1300000 1275000 + 1200000 1212500 + 1100000 1162500 + 1000000 1112500 + 900000 1062500 + 800000 1025000 + 700000 975000 + 600000 937500 + >; }; cpu5: cpu at 101 {@@ -101,6 +136,7 @@ reg = <0x101>; clock-frequency = <1000000000>; cci-control-port = <&cci_control0>; + clock-latency = <140000>; }; cpu6: cpu at 102 {@@ -109,6 +145,7 @@ reg = <0x102>; clock-frequency = <1000000000>; cci-control-port = <&cci_control0>; + clock-latency = <140000>; }; cpu7: cpu at 103 {@@ -117,6 +154,7 @@ reg = <0x103>; clock-frequency = <1000000000>; cci-control-port = <&cci_control0>; + clock-latency = <140000>; }; };
Don't you need to put a reference to the supply in the 5420 board files? ...or is that not possible yet since the max77802 hasn't landed yet? If that's not possible, is there any reason to post the 5420.dtsi patch now? Also: what about 5800? It's so similar to 5420 that it seems a shame not to do them at the same time. -Doug