[PATCH v2 6/7] ARM: dts: rockchip: add core rk3288 dtsi

Quoting Doug Anderson (2014-07-24 16:06:34)

quoted

+       xin24m: xin24m {
+               compatible = "fixed-clock";
+               clock-frequency = <24000000>;
+               #clock-cells = <0>;
+       };

I'm no expert, but strangely every other .dts seems to have the clocks
under a "clocks" node.  That seems to contradict the suggestion made
previously that things should not be on the top level, though.

That usually happens when there is a clock controller (e.g. "clocks")
that has multiple clock signals coming out of it. Typically this is for
a clock generator IP within a SoC or other chip.

However for a single board-level clock such as an osc then it is common
to put it at a top-level for that board since these can change from
board to board.

Also, _I think_ device tree suggests a more generic name for the node
like "oscillator".  You could use "xin24m" as an output name, I think.
Mike could correct me if I'm wrong.

You are correct.

Regards,
Mike