[PATCH v3 2/3] usb: dwc3: dwc3-st: Add st-dwc3 devicetree bindings documentation
From: Lee Jones <hidden>
Date: 2014-07-23 15:34:50
Also in:
linux-devicetree, linux-omap, lkml
On Wed, 23 Jul 2014, Peter Griffin wrote:
quoted hunk ↗ jump to hunk
This patch documents the device tree documentation required for the ST usb3 controller glue layer found in STiH407 devices. Signed-off-by: Giuseppe Cavallaro <redacted> Signed-off-by: Peter Griffin <peter.griffin@linaro.org> --- Documentation/devicetree/bindings/usb/dwc3-st.txt | 69 +++++++++++++++++++++++ 1 file changed, 69 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/dwc3-st.txtdiff --git a/Documentation/devicetree/bindings/usb/dwc3-st.txt b/Documentation/devicetree/bindings/usb/dwc3-st.txt new file mode 100644 index 0000000..de3fea3 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/dwc3-st.txt@@ -0,0 +1,69 @@ +ST DWC3 glue logic + +This file documents the parameters for the dwc3-st driver. +This driver controls the glue logic used to configure the dwc3 core on +STiH407 based platforms. + +Required properties: + - compatible : must be "st,stih407-dwc3"
Does this only exist for Cannes?
+ - reg : glue logic base address and USB syscfg ctrl register offset + - reg-names : should be "reg-glue" and "syscfg-reg" + - st,syscon : should be phandle to system configuration node which + encompasses the glue registers
This should be st,syscfg. As you have it in the example. Besides this small issue, I don't see anything controversial so once fixed up, you can apply my: Acked-by: Lee Jones <redacted> -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org ? Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog