Thread (15 messages) 15 messages, 5 authors, 2014-07-30
STALE4355d
Revisions (5)
  1. v2 [diff vs current]
  2. v1 [diff vs current]
  3. v2 current
  4. v3 [diff vs current]
  5. v4 [diff vs current]

[PATCH v2 2/4] mfd: pm8xxx-spmi: document DT bindings for Qualcomm SPMI PMICs

From: Stanimir Varbanov <hidden>
Date: 2014-07-17 16:24:04
Also in: linux-arm-msm, linux-devicetree, lkml
Subsystem: arm/qualcomm mailing list, multifunction devices (mfd), open firmware and flattened device tree bindings, the rest · Maintainers: Lee Jones, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds

Document DT bindings used to describe the Qualcomm SPMI PMICs.
Currently the SPMI PMICs supported are pm8941, pm8841 and pma8084.

Signed-off-by: Stanimir Varbanov <redacted>
---
 .../devicetree/bindings/mfd/qcom,pm8xxx-spmi.txt   |   49 ++++++++++++++++++++
 1 files changed, 49 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mfd/qcom,pm8xxx-spmi.txt
diff --git a/Documentation/devicetree/bindings/mfd/qcom,pm8xxx-spmi.txt b/Documentation/devicetree/bindings/mfd/qcom,pm8xxx-spmi.txt
new file mode 100644
index 0000000..2b7f5b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/qcom,pm8xxx-spmi.txt
@@ -0,0 +1,49 @@
+          Qualcomm PM8XXX SPMI PMICs multi-function device bindings
+
+The Qualcomm PM8XXX series presently includes PM8941, PM8841 and PMA8084
+PMICs.  These PMICs use a QPNP scheme through SPMI interface.
+QPNP is effectively a partitioning scheme for dividing the SPMI extended
+register space up into logical pieces, and set of fixed register
+locations/definitions within these regions, with some of these regions
+specifically used for interrupt handling.
+
+The QPNP PMICs are used with the Qualcomm Snapdragon series SoCs, and are
+interfaced to the chip via the SPMI (System Power Management Interface) bus.
+Support for multiple independent functions are implemented by splitting the
+16-bit SPMI slave address space into 256 smaller fixed-size regions, 256 bytes
+each. A function can consume one or more of these fixed-size register regions.
+
+Required properties:
+- compatible:      Should contain one of:
+                     "qcom,pm8941"
+                     "qcom,pm8841"
+                     "qcom,pma8084"
+- reg:             Specifies the SPMI USID slave address for this device.
+                   For more information see:
+                   Documentation/devicetree/bindings/spmi/spmi.txt
+
+Required properties for peripheral child nodes:
+- compatible:      Should contain "qcom,pm8xxx-xxx", where "xxx" is
+                   peripheral name. The "pm8xxx" can be any of supported PMICs,
+                   see example below.
+
+Optional properties for peripheral child nodes:
+- interrupts:      Interrupts are specified as a 4-tuple. For more information
+                   see:
+                   Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
+- interrupt-names: Corresponding interrupt name to the interrupts property
+
+Each child node represents a function of the PMIC.
+
+Example:
+
+	pm8941 at 0 {
+		compatible = "qcom,pm8941";
+		reg = <0x0 SPMI_USID>;
+
+		rtc {
+			compatible = "qcom,pm8941-rtc";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "alarm";
+		};
+	};
-- 
1.7.0.4
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help