On 11/07/14 19:28, Andrew Bresticker wrote:

On Thu, Jul 10, 2014 at 2:42 PM, Tuomas Tynkkynen [off-list ref] wrote:

quoted

The DFLL is the main clocksource for the fast CPU cluster on Tegra124
and also provides automatic CPU rail voltage scaling as well. The DFLL
is a separate IP block from the usual Tegra124 clock-and-reset
controller, so it gets its own node in the device tree.

quoted

diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt

quoted

+- nvidia,pmic-voltage-table: Array of 2-tuples.  Each entry should have the
+  form <register-value voltage-in-uV>, indicating the register value that
+  needs to be programmed to the PMIC for changing the VDD_CPU voltage to
+  the specified voltage. The table must be in ascending order by the voltage.

Instead of listing the register values for each voltage in the DT,
can't you use regulator_list_voltage() to create this map?

I don't see a way to get the register values that way, unless we assume 
that the mapping is linear and doesn't have holes.

-- 
nvpublic