@@ -0,0 +1,42 @@
+Tegra124 SoC EMC controller
+
+Required properties :
+- compatible : "nvidia,tegra124-emc".
+- reg : Should contain 1 or 2 entries:
+  - EMC register set
+  - MC register set : Required only if no node with
+    'compatible = "nvidia,tegra124-mc"' exists. The MC register set
+    is first read from the MC node. If it doesn't exist, it is read
+    from this property.
+- timings : Should contain 1 entry for each supported clock rate.
+  Entries should be named "timing at n" where n is a 0-based increasing
+  number. The timings must be listed in rate-ascending order.
+
+Required properties for timings :
+- clock-frequency : Should contain the memory clock rate.
+- nvidia,parent-clock-frequency : Should contain the rate of the EMC
+  clock's parent clock.
+- clocks : Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
+- clock-names : Must include the following entries:
+  - emc-parent : EMC's parent clock.
+- The following properties contain EMC timing characterization values:
+  - nvidia,emc-zcal-cnt-long
+  - nvidia,emc-auto-cal-interval
+  - nvidia,emc-ctt-term-ctrl
+  - nvidia,emc-cfg
+  - nvidia,emc-cfg-2
+  - nvidia,emc-sel-dpd-ctrl
+  - nvidia,emc-cfg-dig-dll
+  - nvidia,emc-bgbias-ctl0
+  - nvidia,emc-auto-cal-config
+  - nvidia,emc-auto-cal-config2
+  - nvidia,emc-auto-cal-config3
+  - nvidia,emc-mode-reset
+  - nvidia,emc-mode-1
+  - nvidia,emc-mode-2
+  - nvidia,emc-mode-4
+- nvidia,emc-burst-data : EMC timing characterization data written to
+                          EMC registers.
+- nvidia,mc-burst-data : EMC timing characterization data written to
+                         MC registers.