Thread (40 messages) 40 messages, 8 authors, 2014-07-21

[PATCH 6/6] ARM: EXYNOS: Register cpuidle device only on Exynos4210 and 5250

From: Kukjin Kim <hidden>
Date: 2014-07-10 13:30:10
Also in: linux-samsung-soc, lkml

Bartlomiej Zolnierkiewicz wrote:
Hi,
Hi Bart,
On Tuesday, July 08, 2014 11:15:21 PM Kukjin Kim wrote:
quoted
Tomasz Figa wrote:
quoted
Currently, the Exynos cpuidle driver works correctly only on Exynos4210
and 5250. Trying to use it with just one CPU online on any other Exynos
SoC will lead to system failure, due to unsupported AFTR mode on other
SoCs. This patch fixes the problem by registering the driver only on
supported SoCs and letting others simply use default WFI mode until
support for them is added.
Hmm...I thought other SoCs have no problem on cpuidle except exynos5420 and
exynos5440....something like this would be helpful to avoid system failure.
But unfortunately this conflicts with Pankaj's cleanup cpufreq_init() and
cpuidle_init() patch you've reviewed and I've applied in my local...

I'm going to check which exynos is ok on cpuidle and then sort them out.
Tomasz's patch is correct - currently only Exynos4210 and Exynos5250 work
fine with AFTR mode and upstream kernel (AFTR gets triggered by offlining
CPUs other than CPU0).

[ Exynos4x12 and Exynos3250 need secure firmware support (patches for this
  need to be reworked on top of recent PM/firmware/cpuidle changes).

  Exynos5410 should use big_little cpuidle driver. ]
Agreed that this is required at this moment.
I will take this into fixes for 3.16.

Thanks,
Kukjin
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help