[PATCH v2 0/2] ARM: at91: remove phy fixup for sama5d3xek boards

Hi Boris,

On 07/10/2014 12:34 AM, Boris BREZILLON wrote:

Hello Bo,

I know you're quite busy, but if you have some time could you test this
series on both CPU Modules (Embest and Ronetix): I only own the Embest
one.

Best Regards,

Boris

On Thu, 26 Jun 2014 12:13:33 +0200
Boris BREZILLON [off-list ref] wrote:

quoted

Hello,

This patch removes a board specific hook for sama5d3xek boards from the
sama5d3 generic DT board file.

This hook (which register a phy fixup configuring board specific delays
in the ksz9021 ethernet phy) is now replaced by the appropriate DT
properties definitions in the sama5d3xcm.dtsi file.

Best Regards,

Boris

Changes since v1:
  - fix txc-skew-ps and rxc-skew-ps delays
  - remove phy address info to handle Ronetix and Embest HW designs

Boris BREZILLON (2):
   ARM: at91/dt: describe rgmii ethernet phy connected to sama5d3xek
     boards
   ARM: at91: remove phy fixup for sama5d3xek boards

  arch/arm/boot/dts/sama5d3xcm.dtsi   | 15 +++++++++++++++
  arch/arm/mach-at91/board-dt-sama5.c | 22 ----------------------
  2 files changed, 15 insertions(+), 22 deletions(-)

For this series, test OK on sama5d33ek (Ronetix) and sama5d34ek (Embest).

Tested-by: Bo Shen <redacted>

Best Regards,
Bo Shen