[PATCH 3/3] dt: qcom: msm8974: add qpnp-spmi device nodes
From: Stanimir Varbanov <hidden>
Date: 2014-07-08 15:56:48
Also in:
linux-arm-msm, linux-devicetree, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
From: Ivan T. Ivanov <redacted> The qpnp-spmi device nodes are childrens of spmi pmic arbiter. msm8974 SoC using two pmic chips pm8941 and pm8841. Every chip has two spmi-qpnp bus id's. Signed-off-by: Stanimir Varbanov <redacted> --- arch/arm/boot/dts/qcom-msm8974.dtsi | 45 +++++++++++++++++++++++++++++++++++ 1 files changed, 45 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 69dca2a..9166b8e 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi@@ -3,6 +3,7 @@ #include "skeleton.dtsi" #include <dt-bindings/clock/qcom,gcc-msm8974.h> +#include <dt-bindings/spmi/spmi.h> / { model = "Qualcomm MSM8974";
@@ -236,5 +237,49 @@ #interrupt-cells = <2>; interrupts = <0 208 0>; }; + + spmi at fc4cf000 { + compatible = "qcom,spmi-pmic-arb"; + reg-names = "core", "intr", "cnfg"; + reg = <0xfc4cf000 0x1000>, + <0xfc4cb000 0x1000>, + <0xfc4ca000 0x1000>; + interrupt-names = "periph_irq"; + interrupts = <0 190 0>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + + usid0: pm8941 at 0 { + compatible = "qcom,qpnp-spmi"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; + + usid1: pm8941 at 1 { + compatible = "qcom,qpnp-spmi"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; + + usid4: pm8841 at 4 { + compatible = "qcom,qpnp-spmi"; + reg = <0x4 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; + + usid5: pm8841 at 5 { + compatible = "qcom,qpnp-spmi"; + reg = <0x5 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; }; };
--
1.7.0.4