[PATCH] arm: mct: Don't reset the counter during boot and resume

Doug Anderson wrote:

Chirantan,

On Tue, Jun 3, 2014 at 11:48 AM, Chirantan Ekbote
[off-list ref] wrote:

quoted

Unfortunately on some exynos systems, resetting the mct counter also
resets the architected timer counter.  This can cause problems if the
architected timer driver has already been initialized because the kernel
will think that the counter has wrapped around, causing a big jump in
printk timestamps and delaying any scheduled clock events until the
counter reaches the value it had before it was reset.

The kernel code makes no assumptions about the initial value of the mct
counter so there is no reason from a software perspective to clear the
counter before starting it.  This also fixes the problems described in
the previous paragraph.

Cc: Olof Johansson <redacted>
Cc: Doug Anderson <dianders@chromium.org>
Cc: Kukjin Kim <redacted>
Cc: Tomasz Figa <redacted>
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-samsung-soc at vger.kernel.org
Signed-off-by: Chirantan Ekbote <redacted>
---
 drivers/clocksource/exynos_mct.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

I can confirm that this fixes problems I described in
<http://www.spinics.net/lists/linux-samsung-soc/msg29085.html>.  Now
when I boot there's no mysterious delay and there's no big jump in
time.

I'd love to see this in 3.16 so we can get rid of this annoying delay.

Reviewed-by: Doug Anderson <dianders@chromium.org>
Tested-by: Doug Anderson <dianders@chromium.org>

OK, I will queue this patch into fixes for 3.16.

Thanks,
Kukjin