[PATCH 4/4 v2] ARM: DTS: Add NTC thermistor nodes to Exynos5420 based Peach_PIT

Exynos5420 based Peach PIT board has 4 NTC thermistors to measure
temperatures at various points on the board.

IIO based ADC becomes the parent and NTC thermistors are the childs,
via the HWMON interface.

Signed-off-by: Naveen Krishna Chatradhi <redacted>
Cc: Doug Anderson <dianders@chromium.org>
---
Changes since v1:
1. Arranged the ADC node alphabetical
2. Added "status = "okay"" to the ADC node

This patch needs
1. MAX77802 PMIC device tree nodes (for ldo9)
   https://www.mail-archive.com/devicetree at vger.kernel.org/msg31430.html
2. Uses the DT documentation for NTC thermistors updated with vendor-prefix

This patch set is tested
1. On Peach PIT board via sysfs entry exposed by hwmon
localhost ~ # cat /sys/class/hwmon/hwmon*/device/temp1_input
37436
36449
38560
38059

2. Backward compatibility is tested by replacing "murata" with "ntc"
   in the dts nodes and running the above test.

 arch/arm/boot/dts/exynos5420-peach-pit.dts |   34 ++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index b96a66a..19d733d 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts

@@ -101,6 +101,40 @@
        };
 };

+&adc {
+       status = "okay";
+       vdd-supply = <&ldo9_reg>;
+
+       ncp15wb473 at 3 {
+               compatible = "murata,ncp15wb473";
+               pullup-uv = <1800000>;
+               pullup-ohm = <47000>;
+               pulldown-ohm = <0>;
+               io-channels = <&adc 3>;
+       };
+       ncp15wb473 at 4 {
+               compatible = "murata,ncp15wb473";
+               pullup-uv = <1800000>;
+               pullup-ohm = <47000>;
+               pulldown-ohm = <0>;
+               io-channels = <&adc 4>;
+       };
+       ncp15wb473 at 5 {
+               compatible = "murata,ncp15wb473";
+               pullup-uv = <1800000>;
+               pullup-ohm = <47000>;
+               pulldown-ohm = <0>;
+               io-channels = <&adc 5>;
+       };
+       ncp15wb473 at 6 {
+               compatible = "murata,ncp15wb473";
+               pullup-uv = <1800000>;
+               pullup-ohm = <47000>;
+               pulldown-ohm = <0>;
+               io-channels = <&adc 6>;
+       };
+};
+
 &dp {
        status = "okay";
        pinctrl-names = "default";
--

1.7.9.5