[PATCH v3 4/8] dt-bindings: ata: add ahci_imx electrical properties
From: Russell King <hidden>
Date: 2014-06-24 10:19:42
Also in:
linux-devicetree, linux-ide
Subsystem:
libata subsystem (serial and parallel ata drivers), open firmware and flattened device tree bindings, the rest · Maintainers:
Damien Le Moal, Niklas Cassel, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Add the documentation for the electrical properties for the iMX SATA controller. There are many values for these, and listing them would be error prone. Refer readers to the device documentation and driver source code for these details. Signed-off-by: Russell King <redacted> --- Documentation/devicetree/bindings/ata/imx-sata.txt | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/Documentation/devicetree/bindings/ata/imx-sata.txt b/Documentation/devicetree/bindings/ata/imx-sata.txt
index aeb99dd986b0..a13f0f603776 100644
--- a/Documentation/devicetree/bindings/ata/imx-sata.txt
+++ b/Documentation/devicetree/bindings/ata/imx-sata.txt@@ -13,6 +13,14 @@ with some special extensions at integration level. required entry in clock-names - clock-names : should include "sata", "sata_ref" and "ahb" entries +Optional properties: +- fsl,transmit-level-mV : transmit voltage level, in millivolts. +- fsl,transmit-boost-mdB : transmit boost level, in milli-decibels +- fsl,transmit-atten-16ths : transmit attenuation, in 16ths +- fsl,receive-eq-mdB : receive equalisation, in milli-decibels + Please refer to the technical documentation or the driver source code + for the list of legal values for these options. + Examples: sata at 02200000 {
--
1.8.3.1