[PATCH 1/2 v2] spi: s3c64xx: use "cs-gpios" from spi node instead of "cs-gpio"
From: Naveen Krishna Chatradhi <hidden>
Date: 2014-06-10 10:08:00
Also in:
linux-devicetree, linux-samsung-soc
Subsystem:
arm/samsung s3c, s5p and exynos arm architectures, open firmware and flattened device tree bindings, samsung spi drivers, spi subsystem, the rest · Maintainers:
Krzysztof Kozlowski, Peter Griffin, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Andi Shyti, Mark Brown, Linus Torvalds
Currently, spi-s3c64xx.c needs "cs-gpio" chip select GPIO to be
defined under "controller-data" node under each slave node.
&spi_x {
cs-gpios <>;
...
slave_node {
controller-data {
cs-gpio = <>;
...
};
...
};
...
};
Where as, SPI core and many other drivers uses "cs-gpios" for
from device tree node.
Hence, make changes in spi-s3c64xx.c driver to make use of
"cs-gpios" from SPI node(parent) instead of "cs-gpio" defined in
slaves "controller-data"(child) node.
Also updates the Device tree Documentation.
Signed-off-by: Naveen Krishna Chatradhi <redacted>
Cc: Javier Martinez Canillas <redacted>
Cc: Doug Anderson <dianders@chromium.org>
---
Changes since v1:
1. fixed a compilation warning thus squashing the other patch into this.
2. Updated device tree description in spi-samsung.txt
.../devicetree/bindings/spi/spi-samsung.txt | 8 ++-
drivers/spi/spi-s3c64xx.c | 56 ++++++++++++--------
2 files changed, 38 insertions(+), 26 deletions(-)
diff --git a/Documentation/devicetree/bindings/spi/spi-samsung.txt b/Documentation/devicetree/bindings/spi/spi-samsung.txt
index 86aa061..13bfcb5 100644
--- a/Documentation/devicetree/bindings/spi/spi-samsung.txt
+++ b/Documentation/devicetree/bindings/spi/spi-samsung.txt@@ -42,15 +42,13 @@ Optional Board Specific Properties: - num-cs: Specifies the number of chip select lines supported. If not specified, the default number of chip select lines is set to 1. +- cs-gpios: should specify GPIOs used for chipselects (see spi-bus.txt) + SPI Controller specific data in SPI slave nodes: - The spi slave nodes should provide the following information which is required by the spi controller. - - cs-gpio: A gpio specifier that specifies the gpio line used as - the slave select line by the spi controller. The format of the gpio - specifier depends on the gpio controller. - - samsung,spi-feedback-delay: The sampling phase shift to be applied on the miso line (to account for any lag in the miso line). The following are the valid values.
@@ -85,6 +83,7 @@ Example: #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&spi0_bus>; + cs-gpios = <&gpa2 5 1 0 3>; w25q80bw at 0 { #address-cells = <1>;
@@ -94,7 +93,6 @@ Example: spi-max-frequency = <10000>; controller-data { - cs-gpio = <&gpa2 5 1 0 3>; samsung,spi-feedback-delay = <0>; };
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 75a5696..4594dde 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c@@ -750,47 +750,56 @@ static int s3c64xx_spi_transfer_one(struct spi_master *master, } static struct s3c64xx_spi_csinfo *s3c64xx_get_slave_ctrldata( - struct spi_device *spi) + struct spi_device *spi, + struct s3c64xx_spi_csinfo *cs) { - struct s3c64xx_spi_csinfo *cs; - struct device_node *slave_np, *data_np = NULL; - struct s3c64xx_spi_driver_data *sdd; + struct device_node *data_np = NULL; u32 fb_delay = 0; - sdd = spi_master_get_devdata(spi->master); - slave_np = spi->dev.of_node; - if (!slave_np) { - dev_err(&spi->dev, "device node not found\n"); + data_np = of_get_child_by_name(spi->dev.of_node, "controller-data"); + if (!data_np) { + dev_err(&spi->dev, "child node 'controller-data' not found\n"); return ERR_PTR(-EINVAL); } - data_np = of_get_child_by_name(slave_np, "controller-data"); - if (!data_np) { - dev_err(&spi->dev, "child node 'controller-data' not found\n"); + of_property_read_u32(data_np, "samsung,spi-feedback-delay", &fb_delay); + cs->fb_delay = fb_delay; + of_node_put(data_np); + + return cs; +} + +static struct s3c64xx_spi_csinfo *s3c64xx_get_cs_gpios(struct spi_device *spi) +{ + struct device_node *parent_np = NULL; + struct s3c64xx_spi_driver_data *sdd; + struct s3c64xx_spi_csinfo *cs; + + parent_np = of_get_parent(spi->dev.of_node); + if (!parent_np) { + dev_err(&spi->dev, "Parent node not found\n"); return ERR_PTR(-EINVAL); } + sdd = spi_master_get_devdata(spi->master); + cs = kzalloc(sizeof(*cs), GFP_KERNEL); if (!cs) { - of_node_put(data_np); + of_node_put(parent_np); return ERR_PTR(-ENOMEM); } /* The CS line is asserted/deasserted by the gpio pin */ if (sdd->cs_gpio) - cs->line = of_get_named_gpio(data_np, "cs-gpio", 0); + cs->line = of_get_named_gpio(parent_np, "cs-gpios", 0); if (!gpio_is_valid(cs->line)) { dev_err(&spi->dev, "chip select gpio is not specified or invalid\n"); - kfree(cs); - of_node_put(data_np); + of_node_put(parent_np); return ERR_PTR(-EINVAL); } - of_property_read_u32(data_np, "samsung,spi-feedback-delay", &fb_delay); - cs->fb_delay = fb_delay; - of_node_put(data_np); - return cs; + return s3c64xx_get_slave_ctrldata(spi, cs); } /*
@@ -806,9 +815,14 @@ static int s3c64xx_spi_setup(struct spi_device *spi) struct s3c64xx_spi_info *sci; int err; + if (!spi->dev.of_node) { + dev_err(&spi->dev, "device node not found\n"); + return -EINVAL; + } + sdd = spi_master_get_devdata(spi->master); if (!cs && spi->dev.of_node) { - cs = s3c64xx_get_slave_ctrldata(spi); + cs = s3c64xx_get_cs_gpios(spi); spi->controller_data = cs; }
@@ -1077,7 +1091,7 @@ static int s3c64xx_spi_probe(struct platform_device *pdev) sdd->sfr_start = mem_res->start; sdd->cs_gpio = true; if (pdev->dev.of_node) { - if (!of_find_property(pdev->dev.of_node, "cs-gpio", NULL)) + if (!of_find_property(pdev->dev.of_node, "cs-gpios", NULL)) sdd->cs_gpio = false; ret = of_alias_get_id(pdev->dev.of_node, "spi");
--
1.7.9.5