[PATCH v2 1/2] usb: chipidea: zynq: Add device tree binding information

On Fri, Jun 27, 2014 at 5:53 PM, Sergei Shtylyov
[off-list ref] wrote:

Hello.


On 06/27/2014 03:23 PM, Punnaiah Choudary Kalluri wrote:

quoted

Document device tree binding information as required by
the ZYNQ USB controller.

quoted

Signed-off-by: Punnaiah Choudary Kalluri <redacted>

[...]

quoted

diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-zynq.txt

b/Documentation/devicetree/bindings/usb/ci-hdrc-zynq.txt
new file mode 100644
index 0000000..54bb3b4

--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ci-hdrc-zynq.txt

@@ -0,0 +1,23 @@
+Xilinx Zynq usb controller based on synopsys usb IP(v2.20a)

   s/usb/USB/.

OK

quoted

+
+Required properties:
+- compatible:   should contain "xlnx,zynq-usb-2.20a"
+- clocks:       clock provider specifier
+- reg:          offset and length of the register set in the memory map
+- interrupt-parent: the phandle for the interrupt controller that
services
+                    interrupts for this device.

   This property has never been required -- it can be inherited from the
upper level node.

OK. i will correct it.

Thanks,
Punnaiah

WBR, Sergei