[PATCH 3/6] ARM: tegra: Add thermal trip points for Jetson TK1
From: mperttunen@nvidia.com (Mikko Perttunen)
Date: 2014-06-27 08:12:39
Also in:
linux-pm, linux-tegra, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
This adds critical trip points to the Jetson TK1 device tree. The device will do a controlled shutdown when either the CPU, GPU or MEM thermal zone reaches 101 degrees Celsius. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> --- arch/arm/boot/dts/tegra124-jetson-tk1.dts | 32 +++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+)
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
index 16082c0..c319443 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts@@ -1825,4 +1825,36 @@ <&tegra_car TEGRA124_CLK_EXTERN1>; clock-names = "pll_a", "pll_a_out0", "mclk"; }; + + thermal-zones { + cpu { + trips { + cpu-critical { + temperature = <101000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + mem { + trips { + mem-critical { + temperature = <101000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpu { + trips { + gpu-critical { + temperature = <101000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; };
--
1.8.1.5