Hello.

On 06/10/2014 12:22 AM, Julius Werner wrote:

quoted

diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 9ffecd5..453d89e 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h

@@ -1582,6 +1582,9 @@ struct xhci_hcd {
         u32                     port_status_u0;
  /* Compliance Mode Timer Triggered every 2 seconds */
  #define COMP_MODE_RCVRY_MSECS 2000
+       /* phys for the controller */
+       struct phy              *phy2_gen;
+       struct phy              *phy3_gen;
  };

I don't think adding new variables here and restricting most of this
logic to xhci-plat.c (in the next patch) is the best way to do it.

    Indeed.

There's no conceptual reason why other host controllers (e.g. xhci-pci
or even EHCI) could not have a similar need to tune their PHY after
reset. PHYs are universal to all host controllers.

There is already a 'phy' member in struct usb_hcd which I think is
mostly unused right now. I think it would be much less
confusing/redundant to reuse that member for this purpose (you could
still set it up from xhci_plat_probe(), and then call it from
hcd_bus_resume() or something like that).

    That member has type 'struct usb_phy *' while here we have 'struct phy *' 
-- feel the difference.
    I have already tried adding 'struct phy *gen_phy' to 'struct usb_hcd', 
however Greg wasn't eager to pick that up so far. Here's the last posting of 
my patch:

http://marc.info/?l=linux-usb&m=140145917506582

WBR, Sergei