[RFC 2/5] ARM: tegra: Add soctherm and thermal zones to Tegra124 device tree
From: mperttunen@nvidia.com (Mikko Perttunen)
Date: 2014-06-19 11:53:45
Also in:
linux-devicetree, linux-pm, linux-tegra, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
This adds the soctherm thermal sensing and management unit to the Tegra124 device tree along with the four thermal zones it exports. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> --- arch/arm/boot/dts/tegra124.dtsi | 47 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+)
diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index d675186..ca884e8 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi@@ -724,6 +724,53 @@ status = "disabled"; }; + thermal-zones { + cpu { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&soctherm 0>; + }; + + mem { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&soctherm 1>; + }; + + gpu { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&soctherm 2>; + }; + + pllx { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&soctherm 3>; + }; + }; + + soctherm: soctherm at 0,700e2000 { + compatible = "nvidia,tegra124-soctherm"; + reg = <0x0 0x700e2000 0x0 0x1000>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_TSENSOR>, + <&tegra_car TEGRA124_CLK_SOC_THERM>; + clock-names = "tsensor", "soc-therm"; + resets = <&tegra_car 78>; + reset-names = "soc-therm"; + + nvidia,thermtrip-threshold-cpu = <105>; + nvidia,thermtrip-threshold-gpu-mem = <105>; + nvidia,thermtrip-threshold-tsense = <105>; + + #thermal-sensor-cells = <1>; + }; + cpus { #address-cells = <1>; #size-cells = <0>;
--
1.8.1.5