[PATCH V3 15/16] documentation: dt: omap: crossbar: add description for interrupt consumer
From: Sricharan R <hidden>
Date: 2014-06-16 11:27:06
Also in:
linux-devicetree, linux-omap, lkml
Subsystem:
open firmware and flattened device tree bindings, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
From: Nishanth Menon <nm@ti.com> The current crossbar description does not include the description required for the consumer of the crossbar, a.k.a devices whoes events pass through the crossbar into the GIC interrupt controller. So, provide documentation for the same. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Sricharan R <redacted> --- .../devicetree/bindings/arm/omap/crossbar.txt | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/omap/crossbar.txt b/Documentation/devicetree/bindings/arm/omap/crossbar.txt
index 41aef44..8210ea4 100644
--- a/Documentation/devicetree/bindings/arm/omap/crossbar.txt
+++ b/Documentation/devicetree/bindings/arm/omap/crossbar.txt@@ -34,3 +34,20 @@ Examples: ti,reg-size = <2>; ti,irqs-reserved = <0 1 2 3 5 6 131 132 139 140>; }; + +Consumer: +======== +See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt and +Documentation/devicetree/bindings/arm/gic.txt for further details. + +An interrupt consumer on an SoC using crossbar will use: + interrupts = <GIC_SPI request_number interrupt_level> +request number shall be between 0 to that described by +"ti,max-crossbar-sources" + +Example: + device_x at 0x4a023000 { + /* Crossbar 8 used */ + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + ... + };
--
1.7.9.5