[PATCH 3/5] clk: Add driver for Maxim 77802 PMIC clocks

Hello Lee,

On 06/16/2014 10:44 AM, Lee Jones wrote:

quoted

The MAX77802 PMIC has two 32.768kHz Buffered Clock Outputs with
Low Jitter Mode. This patch adds support for these two clocks.

Signed-off-by: Javier Martinez Canillas <redacted>
---
 .../devicetree/bindings/clock/maxim,max77802.txt   |  40 ++++
 drivers/clk/Kconfig                                |   6 +
 drivers/clk/Makefile                               |   1 +
 drivers/clk/clk-max77802.c                         | 253 +++++++++++++++++++++
 drivers/mfd/max77802.c                             |   3 +
 include/dt-bindings/clock/maxim,max77802.h         |  22 ++
 6 files changed, 325 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/maxim,max77802.txt
 create mode 100644 drivers/clk/clk-max77802.c
 create mode 100644 include/dt-bindings/clock/maxim,max77802.h

[...]

quoted

diff --git a/drivers/mfd/max77802.c b/drivers/mfd/max77802.c
index 59696dd..33e8023 100644
--- a/drivers/mfd/max77802.c
+++ b/drivers/mfd/max77802.c

@@ -35,6 +35,9 @@
 
 static const struct mfd_cell max77802_devs[] = {
 	{ .name = "max77802-pmic", },
+#if defined(CONFIG_COMMON_CLK_MAX77802)

No, don't do that.  If COMMON_CLK_MAX77802 is not defined it just
won't be matched, which is enough to ensure it won't be probed.

Thanks a lot for the explanation.

I'll send a v2 patch-set soon which has changes based on the feedback from Mark
and Krzysztof. I'll take this point into account as well.

quoted

+	{ .name = "max77802-clk", },
+#endif
 };

[...]

Best regards,
Javier