[PATCH] ARM: dts: am43x-epos-evm: Add Missing cpsw-phy-sel for am43x-epos-evm

On 6/6/2014 12:23 PM, Nishanth Menon wrote:

On 06/06/2014 01:17 AM, George Cherian wrote:

quoted

AM437x EPOS evm use external clock for RMII interface.
Enable the same in DT.

Signed-off-by: George Cherian <redacted>
Reported-by: Nishanth Menon <nm@ti.com>
---
  arch/arm/boot/dts/am43x-epos-evm.dts | 4 ++++
  1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 19f1f7e..90098f9 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts

@@ -319,6 +319,10 @@
  	phy-mode = "rmii";
  };
  
+&phy_sel {
+	rmii-clock-ext;
+};
+
  &i2c0 {
  	status = "okay";
  	pinctrl-names = "default";

Where does this apply on?
With linux-next next-20140506 tag, and this patch applied, I get the

Is'nt next-20140506 a month old.
I tried the patch on next-20140604.

following error.

   LD      kernel/trace/built-in.o
   LD      kernel/built-in.o
build fail, Error:
Error: arch/arm/boot/dts/am43x-epos-evm.dts:219.2-3 label or path,
'phy_sel', not found
FATAL ERROR: Syntax error parsing input tree
make[1]: *** [arch/arm/boot/dts/am43x-epos-evm.dtb] Error 1
make[1]: *** Waiting for unfinished jobs....
make: *** [dtbs] Error 2
make: *** Waiting for unfinished jobs....

in the future, it is helpful if you can point out that this is a
regression seen on next-20140603 and the patch needs to be applied on
some specific branch.

for the record:
last working next tag:
https://github.com/nmenon/kernel-test-logs/blob/next-20140602/omap2plus_defconfig/am43xx-epos.txt

first broken next tag:
https://github.com/nmenon/kernel-test-logs/blob/next-20140603/omap2plus_defconfig/am43xx-epos.txt

-- 
-George