On Mon, Jun 02, 2014 at 07:06:44PM +0200, Vincent Guittot wrote:

quoted

Could you detail those conditions? FWIW those make excellent Changelog
material.

I have looked back into my tests and traces:

In a 1st test, the capacity of the CPU was still above half default
value (power=538) unlike what i remembered. So it's some what "normal"
to keep the task on CPU0 which also handles IRQ because sg_capacity
still returns 1.

OK, so I suspect that once we move to utilization based capacity stuff
we'll do the migration IF the task indeed requires more cpu than can be
provided by the reduced, one, right?

In a 2nd test,the main task runs (most of the time) on CPU0 whereas
the max power of the latter is only 623 and the cpu_power goes below
512 (power=330) during the use case. So the sg_capacity of CPU0 is
null but the main task still stays on CPU0.
The use case (scp transfer) is made of a long running task (ssh) and a
periodic short task (scp). ssh runs on CPU0 and scp runs each 6ms on
CPU1. The newly idle load balance on CPU1 doesn't pull the long
running task although sg_capacity is null because of
sd->nr_balance_failed is never incremented and load_balance doesn't
trig an active load_balance. When an idle balance occurs in the middle
of the newly idle balance, the ssh long task migrates on CPU1 but as
soon as it sleeps and wakes up, it goes back on CPU0 because of the
wake affine which migrates it back on CPU0 (issue solved by patch 09).

OK, so there's two problems here, right?
 1) we don't migrate away from cpu0
 2) if we do, we get pulled back.

And patch 9 solves 2, so maybe enhance its changelog to mention this
slightly more explicit.

Which leaves us with 1.. interesting problem. I'm just not sure
endlessly kicking a low capacity cpu is the right fix for that.


-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140603/e8b14b3d/attachment.sig>