On Fri, May 23, 2014 at 08:02:42PM +0200, Simon Guinot wrote:

On Sun, May 11, 2014 at 10:21:48PM +0200, Andrew Lunn wrote:

quoted

v3:
gpio_poweroff -> gpio-poweroff, etc.
Add stdout-path
Remove pinctrl property from spi, set in kirkwood.dtsi.

Andrew Lunn (4):
  ARM: Kirkwood: Add board file for netxbig LEDs
  ARM: Kirkwood: Add DT descriptions for net2big and net5big.
  ARM: mvebu: Add LaCie 2Big and 5Big Network v2
  ARM: multi_v5: Enable LaCie 2Big and 5Big Network v2

 arch/arm/boot/dts/Makefile              |   2 +
 arch/arm/boot/dts/kirkwood-net2big.dts  |  30 +++++
 arch/arm/boot/dts/kirkwood-net5big.dts  |  83 ++++++++++++++
 arch/arm/boot/dts/kirkwood-netxbig.dtsi | 166 +++++++++++++++++++++++++++
 arch/arm/configs/multi_v5_defconfig     |   1 +
 arch/arm/configs/mvebu_v5_defconfig     |   1 +
 arch/arm/mach-mvebu/Kconfig             |   7 ++
 arch/arm/mach-mvebu/Makefile            |   1 +
 arch/arm/mach-mvebu/board-netxbig.c     | 191 ++++++++++++++++++++++++++++++++
 arch/arm/mach-mvebu/board.h             |   5 +
 arch/arm/mach-mvebu/kirkwood.c          |   3 +
 11 files changed, 490 insertions(+)
 create mode 100644 arch/arm/boot/dts/kirkwood-net2big.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-net5big.dts
 create mode 100644 arch/arm/boot/dts/kirkwood-netxbig.dtsi
 create mode 100644 arch/arm/mach-mvebu/board-netxbig.c

Hi Andrew,

I have successfully tested your patch series (on the top of Linux
3.15-rc6) on a 2Big Network v2 board.

Unfortunately, I failed to test the 5Big Network v2 support. My power
supply died :( And since the connector is very specific, I have to wait
until next Tuesday to get an another one.

Moreover, I have a question. The DT support for the d2 Network v2 board
(d2net_v2) is still missing. Since this board is very close from the
2Big Network v2, I think it should be included in this patch series. Do
you want me to take care of that ?

I'm not sure if Andrew is around so I'll pipe up.  Please do.  Just base
it on top of this patch (along with any fixes ;-) ) and send it
in-reply-to this series (not a hard requirement, just makes maintainer
patch picking easier).

And thanks for taking the time to test!

thx,

Jason.