Thread (22 messages) flat view 22 messages, 6 authors, 2014-07-26

[PATCHv2] mmc: dw_mmc: change to use recommended reset procedure

From: Sonny Rao <hidden>
Date: 2014-05-13 01:38:41
Also in: linux-mmc, linux-samsung-soc
Subsystem: multimedia card (mmc), secure digital (sd) and sdio subsystem, synopsys designware mmc/sd/sdio driver, the rest · Maintainers: Ulf Hansson, Jaehoon Chung, Shawn Lin, Linus Torvalds

This patch changes the fifo reset code to follow the reset procedure
outlined in the documentation of Synopsys  Mobile storage host databook
7.2.13.

v2: Add Generic DMA support
    per the documentation, move interrupt clear before wait
    make the test for DMA host->use_dma rather than host->using_dma
    add proper return values (although it appears no caller checks)

Signed-off-by: Sonny Rao <redacted>
Signed-off-by: Yuvaraj Kumar C D <redacted>
---
 drivers/mmc/host/dw_mmc.c | 55 ++++++++++++++++++++++++++++++++++++++++++++++-
 drivers/mmc/host/dw_mmc.h |  1 +
 2 files changed, 55 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 55cd110..aff57e1 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -2325,6 +2325,7 @@ static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset)
 
 static inline bool dw_mci_fifo_reset(struct dw_mci *host)
 {
+	u32 flags = SDMMC_CTRL_RESET | SDMMC_CTRL_FIFO_RESET;
 	/*
 	 * Reseting generates a block interrupt, hence setting
 	 * the scatter-gather pointer to NULL.
@@ -2334,7 +2335,59 @@ static inline bool dw_mci_fifo_reset(struct dw_mci *host)
 		host->sg = NULL;
 	}
 
-	return dw_mci_ctrl_reset(host, SDMMC_CTRL_FIFO_RESET);
+	/*
+	 * The recommended method for resetting is to always reset the
+	 * controller and the fifo, but differs slightly depending on the mode.
+	 * The Generic DMA mode (non IDMAC) also needs to reset DMA where IDMAC
+	 * mode resets IDMAC at the end.
+	 *
+	 */
+#ifndef CONFIG_MMC_DW_IDMAC
+	if (host->use_dma)
+		flags |= SDMMC_CTRL_DMA_RESET;
+#endif
+	if (dw_mci_ctrl_reset(host, flags)) {
+		/*
+		 * In all cases we clear the RAWINTS register to clear any
+		 * interrupts.
+		 */
+		mci_writel(host, RINTSTS, 0xFFFFFFFF);
+
+		/* if using dma we wait for dma_req to clear */
+		if (host->use_dma) {
+			unsigned long timeout = jiffies + msecs_to_jiffies(500);
+			u32 status;
+			do {
+				status = mci_readl(host, STATUS);
+				if (!(status & SDMMC_STATUS_DMA_REQ))
+					break;
+				cpu_relax();
+			} while (time_before(jiffies, timeout));
+
+			if (status & SDMMC_STATUS_DMA_REQ) {
+				dev_err(host->dev,
+					"%s: Timeout waiting for dma_req to "
+					"clear during reset", __func__);
+				return false;
+			}
+
+			/* when using DMA next we reset the fifo again */
+			dw_mci_ctrl_reset(host, SDMMC_CTRL_FIFO_RESET);
+		}
+	} else {
+		dev_err(host->dev, "%s: Reset bits didn't clear", __func__);
+		return false;
+	}
+
+#ifdef CONFIG_MMC_DW_IDMAC
+	/* It is also recommended that we reset and reprogram idmac */
+	dw_mci_idmac_reset(host);
+#endif
+
+	/* After a CTRL reset we need to have CIU set clock registers  */
+	mci_send_cmd(host->cur_slot, SDMMC_CMD_UPD_CLK, 0);
+
+	return true;
 }
 
 static inline bool dw_mci_ctrl_all_reset(struct dw_mci *host)
diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h
index 6bf24ab..2505804 100644
--- a/drivers/mmc/host/dw_mmc.h
+++ b/drivers/mmc/host/dw_mmc.h
@@ -129,6 +129,7 @@
 #define SDMMC_CMD_INDX(n)		((n) & 0x1F)
 /* Status register defines */
 #define SDMMC_GET_FCNT(x)		(((x)>>17) & 0x1FFF)
+#define SDMMC_STATUS_DMA_REQ		BIT(31)
 /* FIFOTH register defines */
 #define SDMMC_SET_FIFOTH(m, r, t)	(((m) & 0x7) << 28 | \
 					 ((r) & 0xFFF) << 16 | \
-- 
1.9.1.423.g4596e3a
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help