[linux-sunxi] [PATCH v9 1/2] Documentation: dt: Add Allwinner A31 DMA controller bindings
From: Chen-Yu Tsai <hidden>
Date: 2014-05-28 15:14:52
Also in:
lkml
On Thu, May 22, 2014 at 8:34 PM, Maxime Ripard [off-list ref] wrote:
quoted hunk ↗ jump to hunk
The Allwinner A31 DMA controller is rather simple to describe in the DT. Add the bindings documentation. Signed-off-by: Maxime Ripard <redacted> --- .../devicetree/bindings/dma/sun6i-dma.txt | 45 ++++++++++++++++++++++ 1 file changed, 45 insertions(+) create mode 100644 Documentation/devicetree/bindings/dma/sun6i-dma.txtdiff --git a/Documentation/devicetree/bindings/dma/sun6i-dma.txt b/Documentation/devicetree/bindings/dma/sun6i-dma.txt new file mode 100644 index 000000000000..5d7c86d52665 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/sun6i-dma.txt@@ -0,0 +1,45 @@ +Allwinner A31 DMA Controller + +This driver follows the generic DMA bindings defined in dma.txt. + +Required properties: + +- compatible: Must be "allwinner,sun6i-a31-dma" +- reg: Should contain the registers base address and length +- interrupts: Should contain a reference to the interrupt used by this device +- clocks: Should contain a reference to the parent AHB clock +- resets: Should contain a reference to the reset controller asserting + this device in reset
Extra spaces between the leading tabs. (Gmail messes up whitespaces, please see original mail.)
+- #dma-cells : Should be 1, a single cell holding a line request number
+
+Example:
+ dma: dma-controller at 01c02000 {
+ compatible = "allwinner,sun6i-a31-dma";
+ reg = <0x01c02000 0x1000>;
+ interrupts = <0 50 4>;
+ clocks = <&ahb1_gates 6>;
+ resets = <&ahb1_rst 6>;
+ #dma-cells = <1>;
+ };
+
+Clients:
+
+DMA clients connected to the A31 DMA controller must use the format
+described in the dma.txt file, using a two-cell specifier for each
+channel: a phandle plus one integer cells.
+The two cells in order are:
+
+1. A phandle pointing to the DMA controller.
+2. The port ID as specified in the datasheet
+
+Example:
+spi2: spi at 01c6a000 {
+ compatible = "allwinner,sun6i-a31-spi";
+ reg = <0x01c6a000 0x1000>;
+ interrupts = <0 67 4>;
+ clocks = <&ahb1_gates 22>, <&spi2_clk>;
+ clock-names = "ahb", "mod";
+ dmas = <&dma 25>, <&dma 25>;
+ dma-names = "rx", "tx";
+ resets = <&ahb1_rst 22>;
+};
--
1.9.3
--
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe at googlegroups.com.
For more options, visit https://groups.google.com/d/optout.