[RFC PATCH 0/5] watchdog: Add reboot API

Am Donnerstag, 1. Mai 2014, 08:41:28 schrieb Guenter Roeck:

Some hardware implements reboot through its watchdog hardware, for example
by triggering a watchdog timeout or by writing into its watchdog register
set. Platform specific code starts to spread into watchdog drivers,
typically by setting pointers to a callback function which is then called
from the architecture's reset handler.

While global and exported callback function pointers (such as
arm_pm_restart) may be acceptable as long as they are used from platform
and/or architecture code, using such a mechanism across subsystems and
drivers is less than desirable. Ultimately, we'll need a better solution.

This patch series is an attempt to provide such a solution. It extends
the watchdog subsystem to support reboot functionality, provides an
API function call to trigger reboots, adds support for the new API
to arm and arm64, and converts the drivers providing reboot functionality
to use the new infrastructure.

The first patch in the series implements the new API. The second and third
patch modify the arm and arm64 architecture reset handlers to call the
added API function. The final two patches register the reboot handlers
in the sunxi and moxart watchdog drivers with the watchdog subsystem.

The sunxi patche depends on the most recent patch series sumitted by
Maxime Ripard.

a lot of Samsung architectures use a watchdog based reset too (among them some 
of the s3c24xx I care about) and this series looks really great for this, so

Acked-by: Heiko Stuebner <heiko@sntech.de>