Get reset nodes from dt and use reset framework APIs to reset PCIe.
This is needed since reset is handled by the SoC.

Cc: Dan Murphy <redacted>
Signed-off-by: Kishon Vijay Abraham I <redacted>
---
 Documentation/devicetree/bindings/pci/ti-pci.txt |    2 ++
 drivers/pci/host/pci-dra7xx.c                    |   10 ++++++++++
 2 files changed, 12 insertions(+)

diff --git a/Documentation/devicetree/bindings/pci/ti-pci.txt b/Documentation/devicetree/bindings/pci/ti-pci.txt
index 6cb6f09..cfb95c0 100644
--- a/Documentation/devicetree/bindings/pci/ti-pci.txt
+++ b/Documentation/devicetree/bindings/pci/ti-pci.txt

@@ -9,6 +9,8 @@ This node should have the properties described in "designware-pcie.txt".
  - phys : the phandle for the PHY device (used by generic PHY framework)
  - phy-names : the names of the PHY corresponding to the PHYs present in the
    *phy* phandle.
+ - resets: phandle used if reset is handled be soc
+ - reset-names: name given to the phandle

 
 Example:
 pcie at 51000000 {

diff --git a/drivers/pci/host/pci-dra7xx.c b/drivers/pci/host/pci-dra7xx.c
index a37c25c..17d64ee 100644
--- a/drivers/pci/host/pci-dra7xx.c
+++ b/drivers/pci/host/pci-dra7xx.c

@@ -20,6 +20,7 @@
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/resource.h>
+#include <linux/reset.h>
 #include <linux/types.h>
 
 #include "pcie-designware.h"

@@ -281,6 +282,7 @@ static int __init dra7xx_pcie_probe(struct platform_device *pdev)
 	struct resource *res;
 	struct dra7xx_pcie *dra7xx;
 	struct device *dev = &pdev->dev;
+	struct reset_control *rstc;
 
 	dra7xx = devm_kzalloc(&pdev->dev, sizeof(*dra7xx), GFP_KERNEL);
 	if (!dra7xx)

@@ -304,6 +306,14 @@ static int __init dra7xx_pcie_probe(struct platform_device *pdev)
 	if (!base)
 		return -ENOMEM;
 
+	rstc = devm_reset_control_get(dev, "reset");
+	if (IS_ERR(rstc))
+		return PTR_ERR(rstc);
+
+	ret = reset_control_deassert(rstc);
+	if (ret)
+		return ret;
+
 	phy = devm_phy_get(dev, "pcie-phy");
 	if (IS_ERR(phy))
 		return PTR_ERR(phy);