[PATCH 31/55] ARM: OMAP2: export parts of prm2xxx.h header file
From: Tero Kristo <hidden>
Date: 2014-03-31 15:16:10
Also in:
linux-omap
Subsystem:
arm port, omap powerdomain soc adaptation layer support, omap2+ support, power supply class/subsystem and drivers, the rest · Maintainers:
Russell King, Paul Walmsley, Aaro Koskinen, Andreas Kemnade, Kevin Hilman, Roger Quadros, Tony Lindgren, Sebastian Reichel, Linus Torvalds
Some of these are shared between the PRM driver and mach-omap2 board code. Signed-off-by: Tero Kristo <redacted> --- arch/arm/mach-omap2/cm2xxx.c | 4 +++- arch/arm/mach-omap2/prm2xxx.c | 2 +- arch/arm/mach-omap2/prm2xxx.h | 20 +----------------- arch/arm/mach-omap2/prm_common.c | 2 +- include/linux/power/omap/prm2xxx.h | 39 ++++++++++++++++++++++++++++++++++++ 5 files changed, 45 insertions(+), 22 deletions(-) create mode 100644 include/linux/power/omap/prm2xxx.h
diff --git a/arch/arm/mach-omap2/cm2xxx.c b/arch/arm/mach-omap2/cm2xxx.c
index f4a070c..b37783a 100644
--- a/arch/arm/mach-omap2/cm2xxx.c
+++ b/arch/arm/mach-omap2/cm2xxx.c@@ -18,11 +18,13 @@ #include <linux/err.h> #include <linux/io.h> -#include "prm2xxx.h" +#include <linux/power/omap/prm2xxx.h> #include <linux/power/omap/cm.h> #include "cm2xxx_3xxx_private.h" #include <linux/power/omap/cm2xxx.h> #include "clockdomain.h" +#include "prcm-common.h" +#include "prm2xxx_3xxx.h" /* CM_AUTOIDLE_PLL.AUTO_* bit values for DPLLs */ #define DPLL_AUTOIDLE_DISABLE 0x0
diff --git a/arch/arm/mach-omap2/prm2xxx.c b/arch/arm/mach-omap2/prm2xxx.c
index 5b5260c..849b415 100644
--- a/arch/arm/mach-omap2/prm2xxx.c
+++ b/arch/arm/mach-omap2/prm2xxx.c@@ -20,7 +20,7 @@ #include "powerdomain.h" #include "clockdomain.h" -#include "prm2xxx.h" +#include <linux/power/omap/prm2xxx.h> #include "prm2xxx_3xxx_private.h" #include <linux/power/omap/cm2xxx_3xxx.h>
diff --git a/arch/arm/mach-omap2/prm2xxx.h b/arch/arm/mach-omap2/prm2xxx.h
index 071bb6d..19ff266 100644
--- a/arch/arm/mach-omap2/prm2xxx.h
+++ b/arch/arm/mach-omap2/prm2xxx.h@@ -19,6 +19,7 @@ #include "prcm-common.h" #include "prm.h" #include "prm2xxx_3xxx.h" +#include <linux/power/omap/prm2xxx.h> #define OMAP2420_PRM_REGADDR(module, reg) \ OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
@@ -35,9 +36,7 @@ * */ -#define OMAP2_PRCM_REVISION_OFFSET 0x0000 #define OMAP2420_PRCM_REVISION OMAP2420_PRM_REGADDR(OCP_MOD, 0x0000) -#define OMAP2_PRCM_SYSCONFIG_OFFSET 0x0010 #define OMAP2420_PRCM_SYSCONFIG OMAP2420_PRM_REGADDR(OCP_MOD, 0x0010) #define OMAP2_PRCM_IRQSTATUS_MPU_OFFSET 0x0018
@@ -45,11 +44,9 @@ #define OMAP2_PRCM_IRQENABLE_MPU_OFFSET 0x001c #define OMAP2420_PRCM_IRQENABLE_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x001c) -#define OMAP2_PRCM_VOLTCTRL_OFFSET 0x0050 #define OMAP2420_PRCM_VOLTCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0050) #define OMAP2_PRCM_VOLTST_OFFSET 0x0054 #define OMAP2420_PRCM_VOLTST OMAP2420_PRM_REGADDR(OCP_MOD, 0x0054) -#define OMAP2_PRCM_CLKSRC_CTRL_OFFSET 0x0060 #define OMAP2420_PRCM_CLKSRC_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0060) #define OMAP2_PRCM_CLKOUT_CTRL_OFFSET 0x0070 #define OMAP2420_PRCM_CLKOUT_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0070)
@@ -59,9 +56,7 @@ #define OMAP2420_PRCM_CLKCFG_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0080) #define OMAP2_PRCM_CLKCFG_STATUS_OFFSET 0x0084 #define OMAP2420_PRCM_CLKCFG_STATUS OMAP2420_PRM_REGADDR(OCP_MOD, 0x0084) -#define OMAP2_PRCM_VOLTSETUP_OFFSET 0x0090 #define OMAP2420_PRCM_VOLTSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0090) -#define OMAP2_PRCM_CLKSSETUP_OFFSET 0x0094 #define OMAP2420_PRCM_CLKSSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0094) #define OMAP2_PRCM_POLCTRL_OFFSET 0x0098 #define OMAP2420_PRCM_POLCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0098)
@@ -119,17 +114,4 @@ #define OMAP24XX_PRCM_IRQSTATUS_IVA 0x00f8 #define OMAP24XX_PRCM_IRQENABLE_IVA 0x00fc -#ifndef __ASSEMBLER__ -/* Function prototypes */ -extern int omap2xxx_clkdm_sleep(struct clockdomain *clkdm); -extern int omap2xxx_clkdm_wakeup(struct clockdomain *clkdm); - -extern void omap2xxx_prm_dpll_reset(void); -void omap2xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask); -void omap2xxx_prm_init_pm(void); - -extern int __init omap2xxx_prm_init(void); - -#endif - #endif
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index 090d13f..273a338 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c@@ -29,7 +29,7 @@ #include <linux/clk/ti.h> #include "prm2xxx_3xxx.h" -#include "prm2xxx.h" +#include <linux/power/omap/prm2xxx.h> #include "prm3xxx.h" #include "prm44xx.h"
diff --git a/include/linux/power/omap/prm2xxx.h b/include/linux/power/omap/prm2xxx.h
new file mode 100644
index 0000000..32b76d5
--- /dev/null
+++ b/include/linux/power/omap/prm2xxx.h@@ -0,0 +1,39 @@ +/* + * OMAP2xxx Power/Reset Management (PRM) register definitions + * + * Copyright (C) 2007-2009, 2011-2012 Texas Instruments, Inc. + * Copyright (C) 2008-2010 Nokia Corporation + * Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * The PRM hardware modules on the OMAP2/3 are quite similar to each + * other. The PRM on OMAP4 has a new register layout, and is handled + * in a separate file. + */ +#ifndef __LINUX_POWER_OMAP_PRM2XXX_H +#define __LINUX_POWER_OMAP_PRM2XXX_H + +#define OMAP2_PRCM_REVISION_OFFSET 0x0000 +#define OMAP2_PRCM_SYSCONFIG_OFFSET 0x0010 +#define OMAP2_PRCM_VOLTCTRL_OFFSET 0x0050 +#define OMAP2_PRCM_CLKSRC_CTRL_OFFSET 0x0060 +#define OMAP2_PRCM_VOLTSETUP_OFFSET 0x0090 +#define OMAP2_PRCM_CLKSSETUP_OFFSET 0x0094 + +#ifndef __ASSEMBLER__ + +struct clockdomain; + +/* Function prototypes */ +int omap2xxx_clkdm_sleep(struct clockdomain *clkdm); +int omap2xxx_clkdm_wakeup(struct clockdomain *clkdm); +void omap2xxx_prm_dpll_reset(void); +void omap2xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask); +void omap2xxx_prm_init_pm(void); +int __init omap2xxx_prm_init(void); +#endif + +#endif
--
1.7.9.5