[PATCH 1/2] leds: add DT support for LEDs wired to supply and default brightness

On Thu, Mar 27, 2014 at 03:28:32PM -0700, Bryan Wu wrote:

On Fri, Feb 28, 2014 at 1:25 PM, Russell King
[off-list ref] wrote:

quoted

Some PWM outputs are wired such that the LED they're controlling is
connected to supply rather than ground.  Therefore, the duty cycle
needs to be inverted to make the LED behave as it should do.

We also provide a way to specify the default brightness when a
trigger is not specified.

Signed-off-by: Russell King <redacted>
---
 Documentation/devicetree/bindings/leds/leds-pwm.txt |  3 +++
 drivers/leds/leds-pwm.c                             | 15 +++++++++++----
 2 files changed, 14 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/leds/leds-pwm.txt b/Documentation/devicetree/bindings/leds/leds-pwm.txt
index 7297107cf832..ffcb74ab61fd 100644
--- a/Documentation/devicetree/bindings/leds/leds-pwm.txt
+++ b/Documentation/devicetree/bindings/leds/leds-pwm.txt

@@ -13,6 +13,9 @@ node's name represents the name of the corresponding LED.
   For the pwms and pwm-names property please refer to:
   Documentation/devicetree/bindings/pwm/pwm.txt
 - max-brightness : Maximum brightness possible for the LED
+- default-brightness : (optional) Default brightness for the LED
+- active-low : (optional) For PWMs where the LED is wired to supply
+  rather than ground.
 - label :  (optional)
   see Documentation/devicetree/bindings/leds/common.txt
 - linux,default-trigger :  (optional)

Why remove "max-brightness", "label" and "linux,default-trigger" here?

They are not removed, they are just unchanged list items after literal
'-'s in the context of the patch.

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-K?nig            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |