[PATCH v3 0/6] Armada 380 NAND support

On Thu, Mar 13, 2014 at 05:24:27PM -0300, Ezequiel Garcia wrote:

This patchset adds support for the NAND on Armada 380/385 SoCs.

The first patch adds a new "armada-380-corediv-clock" compatible
string, with its proper SoC-specific structure, adding the register
layout for this SoC family.

The second and third patches add the devicetree changes to support
the Core Divider clock.

After adding its clock source, the fourth and fifth patches add
the NAND devicetree changes. The NAND controller is compatible with
the Armada 370 controller, so we are currently support it using the
same compatible string.

The last patch updates the binding documentation for the Core Divider
clock, which is missing the information about the already supported
Armada 375 compatible string.

This series is based on linux-next 20140307. I expect it will apply
cleanly on v3.15-rc1; if that's not the case, I'll send a rebased patchset.

The clock and devicetree changes are mostly independent so they
can be merged through the clock and mvebu tree respectively.

Changes from v2:

  * Removed the unneeded 'nand' label from the flash at d0000 node.

  * Renamed 'coredivclk at e4250' to 'clock at e4250' according to
    ePAPR recomendation, below.

Changes from v1:

  * Changed nand at d0000 with flash at d0000 in the devicetree. The
    latter is compliant with ePAPR recomendation (see ePAPR v1.1,
    section 2.2.2, Generic Names Recommendation).

Ezequiel Garcia (6):
  clk: mvebu: Support Armada 380 SoC on the core divider clock

Applied to mvebu/clk-3xx

  ARM: mvebu: Add a 2 GHz fixed-clock on Armada 38x SoCs
  ARM: mvebu: Add the Core Divider clock to Armada 38x SoCs
  ARM: mvebu: Add support for NAND controller in Armada 38x SoC
  ARM: mvebu: Enable NAND controller in Armada 385-DB

Applied to mvebu/dt

  clk: mvebu: Update binding documentation for the core divider clock

Applied to mvebu/clk-3xx

I'll push for-next with tonight's additions in an hour or so.

thx,

Jason.