Thread (2 messages) 2 messages, 2 authors, 2014-03-06

[PATCH 3/9] Doc/DT: Add DT binding documentation for DVI Connector

From: geert@linux-m68k.org (Geert Uytterhoeven)
Date: 2014-03-06 08:39:40
Also in: dri-devel, linux-devicetree, linux-fbdev

Possibly related (same subject, not in this thread)

On Wed, Mar 5, 2014 at 9:41 AM, Tomi Valkeinen [off-list ref] wrote:
quoted hunk ↗ jump to hunk
On 28/02/14 18:23, Russell King - ARM Linux wrote:
quoted
That's rather a lot of compatible strings.  Another possibility is:

      compatible = "dvi-connector";
      analog;
      digital;
      single-link;
      dual-link;
I made the following changes compared to the posted version. I decided
to leave the "single-link" out, as it's implied if "digital" is set.

 Tomi

@@ -6,11 +6,16 @@ Required properties:

 Optional properties:
 - label: a symbolic name for the connector
-- i2c-bus: phandle to the i2c bus that is connected to DVI DDC
+- ddc-i2c-bus: phandle to the i2c bus that is connected to DVI DDC
+- analog: the connector has DVI analog pins
+- digital: the connector has DVI digital pins
+- dual-link: the connector has pins for DVI dual-link

 Required nodes:
 - Video port for DVI input

+Note: One (or both) of 'analog' or 'digital' must be set.
So dual-link needs both "digital" and "dual-link"?

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help