[PATCH v4 4/4] ARM: OMAP2+: Add pdata quirk for sys_clkout2 for omap3 DBB056

* Christoph Fritz [off-list ref] [140305 05:28]:

On Wed, 2014-03-05 at 15:07 +0200, Tero Kristo wrote:

quoted

On 03/01/2014 12:37 AM, Tony Lindgren wrote:

quoted

* Christoph Fritz [off-list ref] [140214 06:24]:

quoted

Full device tree support for clock control, especially to set frequencies,
is not yet accomplished. Until then, configure the 24Mhz of sys_clkout2 to
feed an USB-Hub here.

Hmm would like to see Tero's comments on this, I wonder if we should
wait on this to avoid extra churn?

Well, the set I posted that adds default clock parenting / default rate 
support to DT hasn't actually moved forward, so you might want to take 
this in as is now if it should be rushed. The clk-enable part isn't done 
currently by anything anyway. Just wondering though, should you create 
some sort of driver for your usb-hub which would control these clocks?

The USB-Hub, a USB2512 is wired as non-configurable. Its pin
'XTAL1/CLKIN' can be connected to either a crystal or an external clock
input. To economise the crystal, the clock-out of the omap is wired
here.

So in my view, a driver is unnecessary.

Yeah that makes sense. Let's try not to rely on pdata-quirks.c for
the new boards.

Regards,

Tony