[PATCH 12/15] mtd: st_spi_fsm: Update Spansion device entries
From: Lee Jones <hidden>
Date: 2014-03-26 16:40:19
Also in:
lkml
Subsystem:
memory technology devices (mtd), the rest · Maintainers:
Miquel Raynal, Richard Weinberger, Vignesh Raghavendra, Linus Torvalds
From: Angus Clark <redacted>
This patch updates various Spansion device entries in the flash_types[] table:
- Define full 6-byte READIDs for S25FL128Sx devices (and fix the 4th
byte). This allows us to differentiate between S25FL129P and S25FL128S
devices.
- Add S25FL128Px device entries.
Signed-off-by: Angus Clark <redacted>
Signed-off-by: Carmelo Amoroso <redacted>
Signed-off-by: Lee Jones <redacted>
---
drivers/mtd/devices/st_spi_fsm.c | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)
diff --git a/drivers/mtd/devices/st_spi_fsm.c b/drivers/mtd/devices/st_spi_fsm.c
index ced7dca..a223d8a 100644
--- a/drivers/mtd/devices/st_spi_fsm.c
+++ b/drivers/mtd/devices/st_spi_fsm.c@@ -480,6 +480,7 @@ static struct flash_info flash_types[] = { /* * Spansion S25FLxxxP * - 256KiB and 64KiB sector variants (identified by ext. JEDEC) + * - S25FL128Px devices do not support DUAL or QUAD I/O */ #define S25FLXXXP_FLAG (FLASH_FLAG_READ_WRITE | \ FLASH_FLAG_READ_1_1_2 | \
@@ -490,6 +491,12 @@ static struct flash_info flash_types[] = { FLASH_FLAG_READ_FAST) RDID_INFO("s25fl032p", RDID({0x01, 0x02, 0x15, 0x4d, 0x00}), 5, 64 * 1024, 64, S25FLXXXP_FLAG, 80, stfsm_s25fl_config), + RDID_INFO("s25fl128p1", RDID({0x01, 0x20, 0x18, 0x03, 0x00}), 5, + 256 * 1024, 64, + (FLASH_FLAG_READ_WRITE | FLASH_FLAG_READ_FAST), 104, NULL), + RDID_INFO("s25fl128p0", RDID({0x01, 0x20, 0x18, 0x03, 0x01}), 5, + 64 * 1024, 256, + (FLASH_FLAG_READ_WRITE | FLASH_FLAG_READ_FAST), 104, NULL), RDID_INFO("s25fl129p0", RDID({0x01, 0x20, 0x18, 0x4d, 0x00}), 5, 256 * 1024, 64, S25FLXXXP_FLAG, 80, stfsm_s25fl_config), RDID_INFO("s25fl129p1", RDID({0x01, 0x20, 0x18, 0x4d, 0x01}), 5,
@@ -503,17 +510,18 @@ static struct flash_info flash_types[] = { * so this information is captured in the board's flags. * - Supports 'DYB' sector protection. Depending on variant, sectors * may default to locked state on power-on. + * - S25FL127Sx handled as S25FL128Sx */ #define S25FLXXXS_FLAG (S25FLXXXP_FLAG | \ FLASH_FLAG_RESET | \ FLASH_FLAG_DYB_LOCKING) - RDID_INFO("s25fl128s0", RDID({0x01, 0x20, 0x18, 0x03, 0x00}), 5, + RDID_INFO("s25fl128s0", RDID({0x01, 0x20, 0x18, 0x4d, 0x00, 0x80}), 6, 256 * 1024, 64, S25FLXXXS_FLAG, 80, stfsm_s25fl_config), - RDID_INFO("s25fl128s1", RDID({0x01, 0x20, 0x18, 0x03, 0x01}), 5, + RDID_INFO("s25fl128s1", RDID({0x01, 0x20, 0x18, 0x4d, 0x01, 0x80}), 6, 64 * 1024, 256, S25FLXXXS_FLAG, 80, stfsm_s25fl_config), - RDID_INFO("s25fl256s0", RDID({0x01, 0x02, 0x19, 0x4d, 0x00}), 5, + RDID_INFO("s25fl256s0", RDID({0x01, 0x02, 0x19, 0x4d, 0x00, 0x80}), 6, 256 * 1024, 128, S25FLXXXS_FLAG, 80, stfsm_s25fl_config), - RDID_INFO("s25fl256s1", RDID({0x01, 0x02, 0x19, 0x4d, 0x01}), 5, + RDID_INFO("s25fl256s1", RDID({0x01, 0x02, 0x19, 0x4d, 0x01, 0x80}), 6, 64 * 1024, 512, S25FLXXXS_FLAG, 80, stfsm_s25fl_config), #define W25X_FLAG (FLASH_FLAG_READ_WRITE | \
--
1.8.3.2