quoted

Here we add the necessary device nodes required for successful device
probing and Pinctrl setup for the FSM.

Acked-by: Srinivas Kandagatla <redacted>
Acked-by Angus Clark [off-list ref]
Signed-off-by: Lee Jones <redacted>
---
 arch/arm/boot/dts/stih416-pinctrl.dtsi | 13 +++++++++++++
 arch/arm/boot/dts/stih416.dtsi         | 13 +++++++++++++
 arch/arm/boot/dts/stih41x-b2020.dtsi   |  1 +
 arch/arm/boot/dts/stih41x-b2020x.dtsi  | 28 ++++++++++++++++++++++++++++
 4 files changed, 55 insertions(+)
 create mode 100644 arch/arm/boot/dts/stih41x-b2020x.dtsi

[...]

quoted

+	soc {
+		spifsm: spifsm at fe902000 {
+			#address-cells = <1>;
+			#size-cells    = <1>;
+
+			status = "okay";
+
+			partition at 0 {
+				label = "Serial Flash 1";

Are you sure you want spaces in the partition label? I suppose MTD can
probably handle this fine, but it doesn't seem standard, and it may
prevent you from using the partition name in certain ways. For instance,
it might make it harder to use with the "ubi.mtd=" module parameter.

But otherwise:

Acked-by: Brian Norris <computersforpeace@gmail.com>

Code fixed and Ack applied.

Thanks Brian.

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog