Just want to ping this again, since no activity for a while. I have
added endian and
access size related information in the documentation.  Please let me
know if more is
needed.

On Wed, Jan 29, 2014 at 4:03 PM, Feng Kan [off-list ref] wrote:

Enable reboot driver for the X-Gene platform. Add generic syscon reboot
driver.

V5 Change:
        - Documentation update, endian and access size.

V4 Change:
        - Remove old X-Gene reboot driver
        - Add generic syscon reboot driver
        - Add DTS and Kconfig for X-Gene reboot using syscon method

V3 Change:
        - Remove the reboot driver's use of acpi resource patch.
        - Change the reboot driver to use syscon to parse out
          system clock register. Remove the old method of getting
          register from the reboot driver directly.
        - Remove documentation since its now simple.

V2 Change:
        - Add support for using ACPI resource.

Feng Kan (5):
  power: reset: Add generic SYSCON register mapped reset
  power: reset: Remove X-Gene reboot driver
  arm64: dts: Add X-Gene reboot driver dts node
  arm64: Select reboot driver for X-Gene platform
  Documentation: power: reset: Add documentation for generic SYSCON
    reboot driver

 .../bindings/power/reset/syscon-reboot.txt         |   23 +++++
 arch/arm64/Kconfig                                 |    2 +
 arch/arm64/boot/dts/apm-storm.dtsi                 |   13 +++
 drivers/power/reset/Kconfig                        |    8 +-
 drivers/power/reset/Makefile                       |    2 +-
 drivers/power/reset/syscon-reboot.c                |  100 +++++++++++++++++++
 drivers/power/reset/xgene-reboot.c                 |  103 --------------------
 7 files changed, 143 insertions(+), 108 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/power/reset/syscon-reboot.txt
 create mode 100644 drivers/power/reset/syscon-reboot.c
 delete mode 100644 drivers/power/reset/xgene-reboot.c

--
1.7.6.1