[PATCH v2 03/13] phy: omap-control: update dra7 and am437 usb2 bindings
From: Roger Quadros <hidden>
Date: 2014-03-06 14:23:51
Also in:
linux-devicetree, linux-ide, linux-omap, lkml
Subsystem:
generic phy framework, open firmware and flattened device tree bindings, the rest · Maintainers:
Vinod Koul, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
The dra7-usb2 and am437-usb2 bindings have not yet been used. Change them to be more elegant. Signed-off-by: Roger Quadros <redacted> --- Documentation/devicetree/bindings/phy/ti-phy.txt | 4 ++-- drivers/phy/phy-omap-control.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt
index 5c5b1b0..28e674b 100644
--- a/Documentation/devicetree/bindings/phy/ti-phy.txt
+++ b/Documentation/devicetree/bindings/phy/ti-phy.txt@@ -9,9 +9,9 @@ Required properties: e.g. USB2_PHY on OMAP5. "ti,control-phy-pipe3" - if it has DPLL and individual Rx & Tx power control e.g. USB3 PHY and SATA PHY on OMAP5. - "ti,control-phy-dra7usb2" - if it has power down register like USB2 PHY on + "ti,control-phy-dra7-usb2" - if it has power down register like USB2 PHY on DRA7 platform. - "ti,control-phy-am437usb2" - if it has power down register like USB2 PHY on + "ti,control-phy-am437-usb2" - if it has power down register like USB2 PHY on AM437 platform. - reg : Address and length of the register set for the device. It contains the address of "otghs_control" for control-phy-otghs or "power" register
diff --git a/drivers/phy/phy-omap-control.c b/drivers/phy/phy-omap-control.c
index 17fc200..a7e2d7f 100644
--- a/drivers/phy/phy-omap-control.c
+++ b/drivers/phy/phy-omap-control.c@@ -228,11 +228,11 @@ static const struct of_device_id omap_control_phy_id_table[] = { .data = &pipe3_data, }, { - .compatible = "ti,control-phy-dra7usb2", + .compatible = "ti,control-phy-dra7-usb2", .data = &dra7usb2_data, }, { - .compatible = "ti,control-phy-am437usb2", + .compatible = "ti,control-phy-am437-usb2", .data = &am437usb2_data, }, {},
--
1.8.3.2