* Javier Martinez Canillas [off-list ref] [140228 10:52]:

Hi Tony,

On Sat, Feb 22, 2014 at 10:59 AM, Javier Martinez Canillas
[off-list ref] wrote:

quoted

This patch is based on commit:

016c12d2 ("ARM: OMAP3: Fix hardware detection for omap3630 when booted with device tree")

and fixes a boot hang due the IGEP board being wrongly initialized
as an OMAP3430 platform instead of an OMAP3630.

Signed-off-by: Javier Martinez Canillas <redacted>
---

Tony and Benoit,

Sorry for posting this patch this late on the -rc cycle but I just didn't
have time before to test IGEP boards against 3.14.

I hope this fix can still make it to 3.14 since is a very big issue
(board not even booting).

Thanks a lot and best regards,
Javier

 arch/arm/boot/dts/omap3-igep0020.dts | 2 +-
 arch/arm/boot/dts/omap3-igep0030.dts | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts
index 25a2b5f..f2779ac 100644
--- a/arch/arm/boot/dts/omap3-igep0020.dts
+++ b/arch/arm/boot/dts/omap3-igep0020.dts

@@ -14,7 +14,7 @@

 / {
        model = "IGEPv2 (TI OMAP AM/DM37x)";
-       compatible = "isee,omap3-igep0020", "ti,omap3";
+       compatible = "isee,omap3-igep0020", "ti,omap36xx", "ti,omap3";

        leds {
                pinctrl-names = "default";

diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts
index 145c58c..2793749 100644
--- a/arch/arm/boot/dts/omap3-igep0030.dts
+++ b/arch/arm/boot/dts/omap3-igep0030.dts

@@ -13,7 +13,7 @@

 / {
        model = "IGEP COM MODULE (TI OMAP AM/DM37x)";
-       compatible = "isee,omap3-igep0030", "ti,omap3";
+       compatible = "isee,omap3-igep0030", "ti,omap36xx", "ti,omap3";

        leds {
                pinctrl-names = "default";
--

1.8.5.3

I saw you send a pull request for 3.14-rc4 fixes and this fix was not included.

Are you planning to send more fixes for 3.14?

Yes hoping to send one more set, got this one tagged for it.

Regards,

Tony