Re: [PATCH] video: imxfb: Use regulator API with LCD class for powering

???????????, 10 ??????? 2014, 14:05 +02:00 ?? Tomi Valkeinen [off-list ref]:

On 21/12/13 13:08, Alexander Shiyan wrote:

quoted

This patch replaces custom lcd_power() callback with
regulator API over LCD class.

Signed-off-by: Alexander Shiyan <redacted>
---
 .../devicetree/bindings/video/fsl,imx-fb.txt       |  1 +
 arch/arm/mach-imx/mach-mx27ads.c                   | 55 +++++++++++++++--
 drivers/video/imxfb.c                              | 71

+++++++++++++++++++---

quoted

 include/linux/platform_data/video-imxfb.h          |  1 -
 4 files changed, 114 insertions(+), 14 deletions(-)

diff --git a/Documentation/devicetree/bindings/video/fsl,imx-fb.txt

b/Documentation/devicetree/bindings/video/fsl,imx-fb.txt

quoted

index 46da08d..e6b1ee9 100644

--- a/Documentation/devicetree/bindings/video/fsl,imx-fb.txt
+++ b/Documentation/devicetree/bindings/video/fsl,imx-fb.txt

@@ -15,6 +15,7 @@ Required nodes:
 	- fsl,pcr: LCDC PCR value
 
 Optional properties:
+- lcd-supply: Regulator for LCD supply voltage.
 - fsl,dmacr: DMA Control Register value. This is optional. By default, the
 	register is not modified as recommended by the datasheet.
 - fsl,lscr1: LCDC Sharp Configuration Register value.

diff --git a/arch/arm/mach-imx/mach-mx27ads.c

...

quoted

+static void __init mx27ads_regulator_init(void)
+{
+	struct gpio_chip *vchip;
+
+	vchip = kzalloc(sizeof(*vchip), GFP_KERNEL);
+	vchip->owner		= THIS_MODULE;
+	vchip->label		= "LCD";
+	vchip->base		= MX27ADS_LCD_GPIO;
+	vchip->ngpio		= 1;
+	vchip->direction_output	= vgpio_dir_out;
+	vchip->set		= vgpio_set;
+	gpiochip_add(vchip);
+
+	platform_device_register_data(&platform_bus, "reg-fixed-voltage",
+				      PLATFORM_DEVID_AUTO,
+				      &mx27ads_lcd_regulator_pdata,
+				      sizeof(mx27ads_lcd_regulator_pdata));
+}
+

Hmm, isn't all this something that should be in the board's .dts?

There are no DT support for this board yet.

---