[PATCHv2 10/16] ARM: OMAP2+: use pdata quirks for iommu reset lines
From: tony@atomide.com (Tony Lindgren)
Date: 2014-02-26 17:17:32
Also in:
linux-devicetree, linux-iommu, linux-omap
* Suman Anna [off-list ref] [140213 10:19]:
The OMAP iommu driver performs the reset management for the iommu instances in processor sub-systems using the omap_device API which are currently supplied as platform data ops. Use pdata quirks to maintain the functionality as the OMAP iommu driver gets converted to use DT nodes, until the reset portions are decoupled from omap_hwmod/omap_device into a separate reset driver. This patch adds the pdata quirks for the reset management of iommus within the DSP (OMAP3 & OMAP4) and IPU subsystems (OMAP4). Signed-off-by: Suman Anna <redacted>
Looks OK, but I suggest you separate out the remaining patches in this series into another clean-up series. Then the clean-up series can be merged later on as these have a good chance of conflicting with other stuff. Tony
quoted hunk
--- arch/arm/mach-omap2/pdata-quirks.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index 3d5b24d..74e094a 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c@@ -16,12 +16,14 @@ #include <linux/wl12xx.h> #include <linux/platform_data/pinctrl-single.h> +#include <linux/platform_data/iommu-omap.h> #include "am35xx.h" #include "common.h" #include "common-board-devices.h" #include "dss-common.h" #include "control.h" +#include "omap_device.h" struct pdata_init { const char *compatible;@@ -92,6 +94,12 @@ static void __init hsmmc2_internal_input_clk(void) omap_ctrl_writel(reg, OMAP343X_CONTROL_DEVCONF1); } +static struct iommu_platform_data omap3_iommu_pdata = { + .reset_name = "mmu", + .assert_reset = omap_device_assert_hardreset, + .deassert_reset = omap_device_deassert_hardreset, +}; + static int omap3_sbc_t3730_twl_callback(struct device *dev, unsigned gpio, unsigned ngpio)@@ -185,6 +193,12 @@ static void __init omap4_panda_legacy_init(void) legacy_init_ehci_clk("auxclk3_ck"); legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 53); } + +static struct iommu_platform_data omap4_iommu_pdata = { + .reset_name = "mmu_cache", + .assert_reset = omap_device_assert_hardreset, + .deassert_reset = omap_device_deassert_hardreset, +}; #endif #ifdef CONFIG_SOC_OMAP5@@ -240,6 +254,8 @@ struct of_dev_auxdata omap_auxdata_lookup[] __initdata = { #ifdef CONFIG_ARCH_OMAP3 OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002030, "48002030.pinmux", &pcs_pdata), OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002a00, "48002a00.pinmux", &pcs_pdata), + OF_DEV_AUXDATA("ti,omap2-iommu", 0x5d000000, "5d000000.mmu", + &omap3_iommu_pdata), /* Only on am3517 */ OF_DEV_AUXDATA("ti,davinci_mdio", 0x5c030000, "davinci_mdio.0", NULL), OF_DEV_AUXDATA("ti,am3517-emac", 0x5c000000, "davinci_emac.0",@@ -248,6 +264,10 @@ struct of_dev_auxdata omap_auxdata_lookup[] __initdata = { #ifdef CONFIG_ARCH_OMAP4 OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a100040, "4a100040.pinmux", &pcs_pdata), OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a31e040, "4a31e040.pinmux", &pcs_pdata), + OF_DEV_AUXDATA("ti,omap4-iommu", 0x4a066000, "4a066000.mmu", + &omap4_iommu_pdata), + OF_DEV_AUXDATA("ti,omap4-iommu", 0x55082000, "55082000.mmu", + &omap4_iommu_pdata), #endif { /* sentinel */ }, };-- 1.8.5.3