[PATCH v5 03/10] Documentation: devicetree: Update Samsung FIMC DT binding
From: s.nawrocki@samsung.com (Sylwester Nawrocki)
Date: 2014-02-24 17:35:15
Also in:
linux-devicetree, linux-media, linux-samsung-soc
Subsystem:
media input infrastructure (v4l/dvb), open firmware and flattened device tree bindings, the rest · Maintainers:
Mauro Carvalho Chehab, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
This patch documents following updates of the Exynos4 SoC camera subsystem devicetree binding: - addition of #clock-cells property to 'camera' node - the #clock-cells property is needed when the sensor sub-devices use clock provided by the camera host interface, - addition of an optional clock-output-names property, - change of the clock-frequency at image sensor node from mandatory to an optional property - the sensor devices can now control their clock themselves and there should be no need to require this property by the camera host device binding, a default frequency value can ofen be used. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> --- Changes since v4: - dropped a requirement of specific order of values in clocks/ clock-names properties (Mark) and reference to clock-names in clock-output-names property description (Mark). --- .../devicetree/bindings/media/samsung-fimc.txt | 34 +++++++++++++++----- 1 file changed, 26 insertions(+), 8 deletions(-)
diff --git a/Documentation/devicetree/bindings/media/samsung-fimc.txt b/Documentation/devicetree/bindings/media/samsung-fimc.txt
index 96312f6..dbd4020 100644
--- a/Documentation/devicetree/bindings/media/samsung-fimc.txt
+++ b/Documentation/devicetree/bindings/media/samsung-fimc.txt@@ -32,6 +32,21 @@ way around. The 'camera' node must include at least one 'fimc' child node. +Optional properties: + +- #clock-cells: from the common clock bindings (../clock/clock-bindings.txt), + must be 1. A clock provider is associated with the 'camera' node and it should + be referenced by external sensors that use clocks provided by the SoC on + CAM_*_CLKOUT pins. The clock specifier cell stores an index of a clock. + The indices are 0, 1 for CAM_A_CLKOUT, CAM_B_CLKOUT clocks respectively. + +- clock-output-names: from the common clock bindings, should contain names of + clocks registered by the camera subsystem corresponding to CAM_A_CLKOUT, + CAM_B_CLKOUT output clocks respectively. + +Note: #clock-cells and clock-output-names are mandatory properties if external +image sensor devices reference 'camera' device node as a clock provider. + 'fimc' device nodes -------------------
@@ -97,8 +112,8 @@ Image sensor nodes The sensor device nodes should be added to their control bus controller (e.g. I2C0) nodes and linked to a port node in the csis or the parallel-ports node, using the common video interfaces bindings, defined in video-interfaces.txt. -The implementation of this bindings requires clock-frequency property to be -present in the sensor device nodes. +An optional clock-frequency property needs to be present in the sensor device +nodes. Default value when this property is not present is 24 MHz. Example:
@@ -114,7 +129,7 @@ Example: vddio-supply = <...>; clock-frequency = <24000000>; - clocks = <...>; + clocks = <&camera 1>; clock-names = "mclk"; port {
@@ -135,7 +150,7 @@ Example: vddio-supply = <...>; clock-frequency = <24000000>; - clocks = <...>; + clocks = <&camera 0>; clock-names = "mclk"; port {
@@ -149,12 +164,15 @@ Example: camera { compatible = "samsung,fimc", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - status = "okay"; - + clocks = <&clock 132>, <&clock 133>; + clock-names = "sclk_cam0", "sclk_cam1"; + #clock-cells = <1>; + clock-output-names = "cam_mclk_a", "cam_mclk_b"; pinctrl-names = "default"; pinctrl-0 = <&cam_port_a_clk_active>; + status = "okay"; + #address-cells = <1>; + #size-cells = <1>; /* parallel camera ports */ parallel-ports {
--
1.7.9.5