[PATCH v6 12/18] ata: ahci_platform: Update DT compatible list
From: Hans de Goede <hidden>
Date: 2014-02-19 12:01:54
Also in:
linux-devicetree, linux-ide
Subsystem:
libata subsystem (serial and parallel ata drivers), open firmware and flattened device tree bindings, the rest · Maintainers:
Damien Le Moal, Niklas Cassel, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
From: Roger Quadros <redacted> The ahci_platform driver supports "snps,dwc-ahci". Add this to the DT binding information. Signed-off-by: Roger Quadros <redacted> Reviewed-by: Bartlomiej Zolnierkiewicz <redacted> Signed-off-by: Hans de Goede <redacted> --- Documentation/devicetree/bindings/ata/ahci-platform.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt
index d86e854..48b285f 100644
--- a/Documentation/devicetree/bindings/ata/ahci-platform.txt
+++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt@@ -6,8 +6,8 @@ Each SATA controller should have its own node. Required properties: - compatible : compatible list, one of "snps,spear-ahci", "snps,exynos5440-ahci", "ibm,476gtr-ahci", - "allwinner,sun4i-a10-ahci", "fsl,imx53-ahci" or - "fsl,imx6q-ahci" + "allwinner,sun4i-a10-ahci", "fsl,imx53-ahci" + "fsl,imx6q-ahci" or "snps,dwc-ahci" - interrupts : <interrupt mapping for SATA IRQ> - reg : <registers mapping>
--
1.8.5.3