[PATCH v6 06/19] watchdog: orion: Handle the interrupt so it's properly acked
From: Ezequiel Garcia <hidden>
Date: 2014-02-06 17:20:13
Also in:
linux-devicetree, linux-watchdog
Subsystem:
open firmware and flattened device tree bindings, the rest, watchdog device drivers · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds, Wim Van Sebroeck, Guenter Roeck
DT-enabled plaforms, where the irqchip driver for the brigde interrupt controller is available, can handle the watchdog IRQ properly. Therefore, request the interrupt and add a dummy handler that merely calls panic(). This is done in order to have an initial 'ack' of the interruption, which clears the watchdog state. Furthermore, since some platforms don't have such IRQ, this commit makes the interrupt specification optional. Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Tested-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Ezequiel Garcia <redacted> --- .../devicetree/bindings/watchdog/marvel.txt | 2 ++ drivers/watchdog/orion_wdt.c | 24 +++++++++++++++++++++- 2 files changed, 25 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/watchdog/marvel.txt b/Documentation/devicetree/bindings/watchdog/marvel.txt
index 5dc8d30..0731fbd 100644
--- a/Documentation/devicetree/bindings/watchdog/marvel.txt
+++ b/Documentation/devicetree/bindings/watchdog/marvel.txt@@ -7,6 +7,7 @@ Required Properties: Optional properties: +- interrupts : Contains the IRQ for watchdog expiration - timeout-sec : Contains the watchdog timeout in seconds Example:
@@ -14,6 +15,7 @@ Example: wdt at 20300 { compatible = "marvell,orion-wdt"; reg = <0x20300 0x28>; + interrupts = <3>; timeout-sec = <10>; status = "okay"; };
diff --git a/drivers/watchdog/orion_wdt.c b/drivers/watchdog/orion_wdt.c
index 2dbeee9..5b9b80c 100644
--- a/drivers/watchdog/orion_wdt.c
+++ b/drivers/watchdog/orion_wdt.c@@ -19,6 +19,7 @@ #include <linux/platform_device.h> #include <linux/watchdog.h> #include <linux/init.h> +#include <linux/interrupt.h> #include <linux/io.h> #include <linux/clk.h> #include <linux/err.h>
@@ -109,10 +110,16 @@ static struct watchdog_device orion_wdt = { .min_timeout = 1, }; +static irqreturn_t orion_wdt_irq(int irq, void *devid) +{ + panic("Watchdog Timeout"); + return IRQ_HANDLED; +} + static int orion_wdt_probe(struct platform_device *pdev) { struct resource *res; - int ret; + int ret, irq; clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(clk)) {
@@ -145,6 +152,21 @@ static int orion_wdt_probe(struct platform_device *pdev) /* Let's make sure the watchdog is fully stopped */ orion_wdt_stop(&orion_wdt); + /* Request the IRQ only after the watchdog is disabled */ + irq = platform_get_irq(pdev, 0); + if (irq > 0) { + /* + * Not all supported platforms specify an interrupt for the + * watchdog, so let's make it optional. + */ + ret = devm_request_irq(&pdev->dev, irq, orion_wdt_irq, 0, + pdev->name, &orion_wdt); + if (ret < 0) { + dev_err(&pdev->dev, "failed to request IRQ\n"); + goto disable_clk; + } + } + watchdog_set_nowayout(&orion_wdt, nowayout); ret = watchdog_register_device(&orion_wdt); if (ret)
--
1.8.1.5