Wrapping... (I've had to manually edit this.)

On Mon, Feb 24, 2014 at 01:03:32PM -0600, Joel Fernandes wrote:

Just wanted your thoughts/suggestions on how we can avoid overhead in
the EDMA dmaengine driver. I am seeing a lots of performance drop
specially for small transfers with EDMA versus before raw EDMA was
moved to DMAEngine framework (atleast 25%).

One of the things I am thinking about is the repeated (spin)
locking/unlocking of the virt_dma_chan->lock or vc->lock. In many
cases, there's only 1 user or thread requiring to do a DMA, so I
feel the locking is unnecessary and potential overhead. If there's
a sane way to detect this an avoid locking altogether, that
would be great.

For the case where there's no contention, spinlocks /should/ be light.
What will make them more expensive is if you have things like lockdep
enabled, which adds much more code into those paths to do state tracking.
It's a known side effect of using that debug.

So, if you're developing, then you should always have turned lockdep on.
If you're testing for performance, you should have lockdep and spinlock
debugging turned off.

 Also with respect to virt_dma (which is used by edma to manage all the
descriptors and lists) there are too many lists: submitted, issued,
completed etc and the descriptor moves from one to the other. I am
thinking if there is a way we can avoid using so many lists and just
have 2 lists and move the desc from one list to the other, That could
avoid using the intermediate list altogether and classify dma requests
as "done" or "not done".

The reason I created separate submitted and issued lists is that it's
much easier to manage than having everything on a single list.

We could deal with the submitted vs issued list, and that's to have the
channel store the cookie for the last issued descriptor - but I wonder
if it's worth the effort.

What I'd suggest is to try some profiling, and post some profiling
results which show where the problems are, rather than pointing at
bits of code you might not particularly like.

-- 
FTTC broadband for 0.8mile line: now at 9.7Mbps down 460kbps up... slowly
improving, and getting towards what was expected from it.