Thread (1 message) 1 message, 1 author, 2014-02-22

[PATCH v3 10/11] watchdog: xilinx: Enable this driver for Zynq

From: linux@roeck-us.net (Guenter Roeck)
Date: 2014-02-22 20:42:33
Also in: linux-watchdog, lkml

On 02/22/2014 10:44 AM, Wim Van Sebroeck wrote:
Hi Michal,
quoted
Enable this driver for Zynq.
Move it to architecture independent Kconfig part.

Signed-off-by: Michal Simek <redacted>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
---

Changes in v3: None
Changes in v2: None

Build tested by zero day testing system.
---
  drivers/watchdog/Kconfig | 22 +++++++++-------------
  1 file changed, 9 insertions(+), 13 deletions(-)
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 9db5d3c..6120403 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -111,6 +111,15 @@ config WM8350_WATCHDOG
  	  Support for the watchdog in the WM8350 AudioPlus PMIC.  When
  	  the watchdog triggers the system will be reset.

+config XILINX_WATCHDOG
+	tristate "Xilinx Watchdog timer"
+	select WATCHDOG_CORE
+	help
+	  Watchdog driver for the xps_timebase_wdt ip core.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called of_xilinx_wdt.
+
  # ALPHA Architecture

  # ARM Architecture
@@ -1022,19 +1031,6 @@ config M54xx_WATCHDOG

  # MicroBlaze Architecture

-config XILINX_WATCHDOG
-	tristate "Xilinx Watchdog timer"
-	depends on MICROBLAZE
-	select WATCHDOG_CORE
-	---help---
-	  Watchdog driver for the xps_timebase_wdt ip core.
-
-	  IMPORTANT: The xps_timebase_wdt parent must have the property
-	  "clock-frequency" at device tree.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called of_xilinx_wdt.
-
  # MIPS Architecture

  config ATH79_WDT
--
1.8.2.3
Are we sure that we don't need an additional dependancy (like depends on HAS_IOMEM) to not have issues with other architectures?
Hi Wim,

Doesn't look like it. I have the series in my build test and did not
see any failures because of it. See http://server.roeck-us.net:8010/builders,
branch watchdog-next.

Which reminds me that I wanted to reparent the branch to 3.14-rc3.
I just did that; you should be able to see build results in a couple
of hours.

Guenter
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help