The BCM59056 is a multi-function power management unit used with the
BCM281xx family of SoCs. This series adds an MFD and voltage regulator
driver to support the BCM59056. The bcm28155-ap DT support is updated
to enable use of regulators on the otg and sdhci peripherals.
Matt Porter (6):
i2c: bcm-kona: register with subsys_initcall
regulator: add bcm59056 pmu DT binding
mfd: add bcm59056 pmu driver
regulator: add bcm59056 regulator driver
ARM: configs: bcm_defconfig: enable bcm59056 regulator support
ARM: dts: add bcm59056 pmu support and enable for bcm28155-ap
.../devicetree/bindings/regulator/bcm59056.txt | 37 ++
arch/arm/boot/dts/bcm28155-ap.dts | 41 ++
arch/arm/boot/dts/bcm59056.dtsi | 158 ++++++++
arch/arm/configs/bcm_defconfig | 7 +
drivers/i2c/busses/i2c-bcm-kona.c | 14 +-
drivers/mfd/Kconfig | 8 +
drivers/mfd/Makefile | 1 +
drivers/mfd/bcm59056.c | 119 ++++++
drivers/regulator/Kconfig | 8 +
drivers/regulator/Makefile | 1 +
drivers/regulator/bcm59056-regulator.c | 445 +++++++++++++++++++++
include/linux/mfd/bcm59056.h | 35 ++
12 files changed, 873 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/regulator/bcm59056.txt
create mode 100644 arch/arm/boot/dts/bcm59056.dtsi
create mode 100644 drivers/mfd/bcm59056.c
create mode 100644 drivers/regulator/bcm59056-regulator.c
create mode 100644 include/linux/mfd/bcm59056.h
FYI: Mark's email address is not correct. Not sure where you pulled
this one up from, but he doesn't have access to it anymore.
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog