[PATCH v3 5/5] ARM: dts: sun7i: Add pin muxing options for clock outputs
From: Chen-Yu Tsai <hidden>
Date: 2014-01-01 02:30:50
Subsystem:
the rest · Maintainer:
Linus Torvalds
This patch adds the clock output pin options on the A20. The 2 pins can output a configurable clock to be used by external modules. This is used on the CubieTruck, to supply a 32768 Hz low power clock to the onboard Wifi+BT module. Signed-off-by: Chen-Yu Tsai <redacted> --- arch/arm/boot/dts/sun7i-a20.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index e192c99..0062811 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi@@ -418,6 +418,20 @@ allwinner,drive = <0>; allwinner,pull = <0>; }; + + clk_out_a_pins_a: clk_out_a at 0 { + allwinner,pins = "PI12"; + allwinner,function = "clk_out_a"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + clk_out_b_pins_a: clk_out_b at 0 { + allwinner,pins = "PI13"; + allwinner,function = "clk_out_b"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; }; timer at 01c20c00 {
--
1.8.5.2