[PATCH RFC v3 6/8] drm/tilcdc: Add I2C HDMI audio config for tda998x
From: Jyri Sarha <hidden>
Date: 2014-01-27 15:37:55
Also in:
alsa-devel, dri-devel, linux-omap
Subsystem:
drm drivers, drm drivers and misc gpu patches, drm drivers for ti lcdc, the rest · Maintainers:
David Airlie, Simona Vetter, Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann, Jyri Sarha, Tomi Valkeinen, Linus Torvalds
The configuration is needed for HDMI audio. The "swap" and "mirr" parameters have to be correctly set in the configuration in order to have proper colors in the HDMI picture. Signed-off-by: Jyri Sarha <redacted> cc: airlied at linux.ie --- drivers/gpu/drm/tilcdc/tilcdc_slave.c | 24 +++++++++++++++++++++++- 1 file changed, 23 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_slave.c b/drivers/gpu/drm/tilcdc/tilcdc_slave.c
index 595068b..e43240a 100644
--- a/drivers/gpu/drm/tilcdc/tilcdc_slave.c
+++ b/drivers/gpu/drm/tilcdc/tilcdc_slave.c@@ -19,6 +19,7 @@ #include <linux/pinctrl/pinmux.h> #include <linux/pinctrl/consumer.h> #include <drm/drm_encoder_slave.h> +#include <drm/i2c/tda998x.h> #include "tilcdc_drv.h"
@@ -111,8 +112,29 @@ static const struct drm_encoder_helper_funcs slave_encoder_helper_funcs = { .restore = drm_i2c_encoder_restore, }; +static struct tda998x_encoder_params tda998x_pdata = { + .swap_b = 0x3, + .mirr_b = 0x0, + .swap_a = 0x2, + .mirr_a = 0x0, + .swap_d = 0x1, + .mirr_d = 0x0, + .swap_c = 0x0, + .mirr_c = 0x0, + .swap_f = 0x5, + .mirr_f = 0x0, + .swap_e = 0x4, + .mirr_e = 0x0, + .audio_cfg = 0x3, /* I2S mode */ + .audio_clk_cfg = 1, /* select clock pin */ + .audio_frame[1] = 1, /* channels - 1 */ + .audio_format = AFMT_I2S, + .audio_sample_rate = 48000, +}; + static const struct i2c_board_info info = { - I2C_BOARD_INFO("tda998x", 0x70) + I2C_BOARD_INFO("tda998x", 0x70), + .platform_data = &tda998x_pdata, }; static struct drm_encoder *slave_encoder_create(struct drm_device *dev,
--
1.7.9.5