Thanks Russell. Got it working.

Regards,

john

On Fri, Jan 24, 2014 at 1:24 PM, Russell King - ARM Linux
[off-list ref] wrote:

On Fri, Jan 24, 2014 at 01:14:08PM -0800, John Tobias wrote:

quoted

Hello all,

I am testing the suspend mode (S3) for my custom board with iMX6SL and
the iMX6SL EVK as well. I am using 3.13 kernel, eMMC and MMC for the
storage and systemd to control the OS. If I put my device in S3 mode,
I got the following messages:

[   27.949393] PM: Syncing filesystems ... done.
[   27.972392] mmc0: card 0001 removed
[   28.033613] end_request: I/O error, dev mmcblk0, sector 0
[   28.063493] end_request: I/O error, dev mmcblk0, sector 0
[   28.107933] end_request: I/O error, dev mmcblk0, sector 0
[   28.131456] end_request: I/O error, dev mmcblk0, sector 0
[   28.153651] end_request: I/O error, dev mmcblk0, sector 0
[   28.215530] Freezing user space processes ... (elapsed 0.001 seconds) done.
[   28.224284] Freezing remaining freezable tasks ... (elapsed 0.001
seconds) done.
[   28.233658] Suspending console(s) (use no_console_suspend to debug)

If I press any key, it will wake up. But, I got the following errors:

[   17.815008] mmc0: new high speed DDR MMC card at address 0001
[   17.828024] mmcblk0: mmc0:0001 SEM04G 3.68 GiB
[   17.833522] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB
[   17.839699] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB
[   17.847150] mmcblk0rpmb: mmc0:0001 SEM04G partition 3 2.00 MiB
[   17.860116]  mmcblk0: p1 p2 p3 p4 < p5 p6 >
[   17.883550]  mmcblk0boot1: unknown partition table
[   17.899549]  mmcblk0boot0: unknown partition table

This is because MMC insists that when you suspend, the card will be
ejected, and when you resume, it will be re-inserted - it's effectively
the same as if you pulled the card out and then plugged it back in
without shutting the system down.

This is the default for the MMC subsystem, unless MMC_UNSAFE_RESUME
is set - and you can't have rootfs in MMC and suspend/resume unless
that's set.

--
FTTC broadband for 0.8mile line: 5.8Mbps down 500kbps up.  Estimation
in database were 13.1 to 19Mbit for a good line, about 7.5+ for a bad.
Estimate before purchase was "up to 13.2Mbit".