[PATCH v2 8/8] arm: sun7i: cubietruck: Enable the i2c controllers
From: Chen-Yu Tsai <hidden>
Date: 2014-01-06 05:58:12
Subsystem:
the rest · Maintainer:
Linus Torvalds
The Cubietruck makes use of the first three i2c controllers found on the Allwinner A20; i2c-0 is used internally for the PMIC, i2c-1 is exposed on the board headers, and i2c-2 is used for DDC on the VGA connector. This patch enables them in the device tree. Signed-off-by: Chen-Yu Tsai <redacted> --- arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)
diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
index 8a1009d..f9dcb61 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts@@ -33,6 +33,24 @@ pinctrl-0 = <&uart0_pins_a>; status = "okay"; }; + + i2c0: i2c at 01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + }; + + i2c1: i2c at 01c2b000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + }; + + i2c2: i2c at 01c2b400 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; + }; }; leds {
--
1.8.5.2