[PATCH v5 06/20] watchdog: orion: Make sure the watchdog is initially stopped

Having the watchdog initially fully stopped is important to avoid
any spurious watchdog triggers, in case the registers are not in
its reset state.

Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Ezequiel Garcia <redacted>
---
 drivers/watchdog/orion_wdt.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/watchdog/orion_wdt.c b/drivers/watchdog/orion_wdt.c
index 6746033..2dbeee9 100644
--- a/drivers/watchdog/orion_wdt.c
+++ b/drivers/watchdog/orion_wdt.c

@@ -142,6 +142,9 @@ static int orion_wdt_probe(struct platform_device *pdev)
 	orion_wdt.max_timeout = wdt_max_duration;
 	watchdog_init_timeout(&orion_wdt, heartbeat, &pdev->dev);
 
+	/* Let's make sure the watchdog is fully stopped */
+	orion_wdt_stop(&orion_wdt);
+
 	watchdog_set_nowayout(&orion_wdt, nowayout);
 	ret = watchdog_register_device(&orion_wdt);
 	if (ret)

-- 
1.8.1.5